Comments for Bombshock

Comment on VENDING MACHINES ISSUE #2 by Ollie

Ollie — Thu, 13 Nov 2008 23:23:24 +0000

Look we would like to hear about your lock picking tecknique but when you write it in every catagory and name it wrong to fit that catagory it gets anoying to dam anoying so could you please stop!

Plus the Police are watching this archive! (i have a friend whos a copper and thats what he told me)

Comment on BIG BROTHER’S IMPLANTABLE/INJECTABLE MICRO/BIO-CHIPS by Mr. Med

Mr. Med — Wed, 12 Nov 2008 13:46:34 +0000

Even now, perhaps some 10 years after this article, subdermal RFID tags must be specifically and surgically implanted. If not, they simply cannot exist in the body without causing horrible damage to the subject as the tag races through the body. And the thought of an RFID capsule fitting down a vaccine’s hypodermic needle? Ridiculous! Those needles have internal radii of about 500 microns on average, and the smallest RFID tag to date is about 1500 microns wide and at least 2 full centimeters in length. It is a full-on outpatient procedure to install one of these, and the chip cannot be read from more than a few inches away, meaning that a near-skin implant is critical, and thus is very noticeable when going in.

As for the crock at the end, make of it what you will. There will always be conspiracy theorists out there in every shape and size, but I promise you that there are few around less likely than this.

Med out.

Comment on Stink Bombs by ghostwolf

ghostwolf — Mon, 10 Nov 2008 16:58:34 +0000

1/2 cup Ammonia, 50 match heads. Let it sit for a week.

Comment on How to make alcohol… by nathan

nathan — Fri, 07 Nov 2008 19:55:51 +0000

to make rum would treacle work causes i fancy makin some an i dont think its illeagal here in uk

Comment on LSD by fuckindave

fuckindave — Mon, 03 Nov 2008 08:52:17 +0000

that is lsa you asshole. It can be derived from hbw seeds as well.

Comment on How to Make Ammonium Nitrate by denny

denny — Fri, 31 Oct 2008 11:40:27 +0000

great i can try my exlplosive now

Comment on The Marlock System by Joseph

Joseph — Wed, 29 Oct 2008 01:05:20 +0000

Curious, if one was to change the battery pack and all of sudden found out his key doesnt work, whats happened and what can be done?? This is a closed circuit stand alone unit.

Comment on Make Chlorine Gas by KD

KD — Tue, 28 Oct 2008 02:36:11 +0000

OMG, y do u put this on here? anyone could read this, and set it off!!! but thanks for the info, i needed it for my history project, LOL!

Comment on ~ The Cattle Prod ~ by juggalo

juggalo — Mon, 27 Oct 2008 19:22:10 +0000

i know i can use a audio transformer, standerd transistor, oscillator and pulse generator but where do i find these parts?

Comment on ~ The Cattle Prod ~ by juggalo

juggalo — Mon, 27 Oct 2008 19:11:57 +0000

I want to build 1 from scratch with an old amp or tv parts ,i know its not complicated or hard to build but i keep getting the same thing on the internet…disposable cam!

Comment on 101 WAYS TO KILL SOMEONE by Dr. Mann

Dr. Mann — Thu, 23 Oct 2008 12:22:45 +0000

Also a good idea with syringes:

Take into account the fact that not many forensics labs will test blood types present in a victim’s body, and realize that less that 1% of the world’s population have type AB (universal recipient) which will cause a hemolytic reaction in anyone without type AB, leading to acute renal failure, which can be fatal if left uncured within a VERY small time-frame. All it requires is a single 50cc dose or so to cause a lethal case of hemolysis, especially if the victim is unlikely to notice the common symptoms (decreased urine output, lethargy or sluggishness, and fluid imbalances) for a day or so. In almost any case, they will suffer severe acute renal failure, and the resultant kidney failure causes death via blood toxin levels climbing into lethal ranges.

Blood banks are not very closely guarded, and for employees, it would be a simple matter to quietly remove a single unit of type AB blood, which would be reported as a ‘clerical error’ when (and indeed if) it was noticed missing, which would supply more than enough to cause fatal reactions in at least one subject.

Note that the delay time of this method is also good in that it allows the perpetrator time to dissociate themselves from the victim, as well as time to dispose of any remaining tools, if needed.

Comment on The Avenger’s Handbook by guide

guide — Wed, 22 Oct 2008 14:53:18 +0000

Just dropping in to let you know you have an interesting site. I hope you’ll continue to work on it. Wishing you all the best.

Comment on Make Chlorine Gas by matt

matt — Mon, 20 Oct 2008 02:13:21 +0000

well actually you should use magnese oxide IV place in beaker have a drip tube with muratic acid slowlly drpping onto it and gentlly heat the beaker and the gasses should form. straight outta chemistry encyclopedias

Comment on Blowgun by monkeyfuker123

monkeyfuker123 — Sun, 19 Oct 2008 11:53:44 +0000

whoopee now i can shoot darts at people using my mouth!

Comment on The Complete Guide to Beastiality and Necro-Beastiality by The Dude!

The Dude! — Thu, 16 Oct 2008 05:06:44 +0000

Ah, this reminds of the good ol’ days in college. I knew I’d be able to find this fucked up shit somewhere. Wasn’t this on rotten.com at one point? Somewhere.

Sick, sick, hilarious shit.

Comment on Fun things to do to stupid neighbors by Mark

Mark — Thu, 16 Oct 2008 02:32:16 +0000

Barb shut up. this stuff is GREAT!!!

Comment on How To Make Tear Gas In Your BaseMent by Sarah

Sarah — Wed, 15 Oct 2008 20:51:40 +0000

This is a little too complicated, it does’nt even looks like it will work. Isn’t there an easier way?

Comment on LSD by joe

joe — Wed, 15 Oct 2008 04:11:18 +0000

Yeah its real, this is actually an excerpt from the Anarchist Cookbook

Comment on Making homemade Teargas by jaime

jaime — Tue, 14 Oct 2008 10:24:04 +0000

beautiful!
thank you for that very very much!

Comment on VENDING MACHINE KEYS by Hidn

Hidn — Fri, 10 Oct 2008 22:23:04 +0000

YEAHH!! have fun trying to get that to work!! it’s clear that the person who wrote this article doesn’t understand how cylindrical locks work! the pins are pushed outward, and either way, you get an imprint of how the lock normally is, not how it is when the pins are pushed in.