[>:/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:\/:<]
[\ A
Black September Presentation /]
[/ How to make Electrical Timers \]
[\ /]
[/
Written By: \]
[\ /]
[/ Fletch \]
[\ /]
[/ Special Thanks to: \]
[\
Lightning Phantom /]
[/ 02/27/88 \]
[>:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:<]
File 01:Dripping Tap Timer
==========================
This type of timer
is made for a sink/faucet of some sort, where you
can control the rate of water dripping out
of the nozzle. The most convenient way of doing this is to place the whole thing in the sink, but
the charge (bomb) can be placed elsewhere, depending on how much wire you have. What you’re gonna
have to do is get a glass jar (or any other non-conducting container), size doesn’t matter
(depending on how much time you need). Hook two wires to aluminum foil (Steel wool may also be
used), placing the strips of aluminum over the mouth of the jar. Connect one wire directly to the
detonator. Connect the second wire directly to the battery. Run a third wire from the battery
directly to the detonator. Now place the glass jar under the dripping tap (if not already placed),
and turn faucet on (adjust the rate according to how much time you need). When the water level in
the jar reaches the aluminum foil contacts, the electrical circuit is closed, thus detonating the
bomb.
File 02:Relay Timer
===================
This type of timer is
best used when long delays are required. You will need two batteries (A & B respectively). Hook
battery A to a relay. Battery A gives the power to the relay’s electromagnet. When battery A fails,
the circuit running through the relay closes. Battery B is hooked so that when the relay closes, it
fires the charge. Experiment with various batteries till you find the best type of battery to use
for the desired delay.
File 03:Hourglass Timer
=======================
replacing it with
metal filings. Now make two small holes into one end of the hourglass. Hook one wire from the
battery directly to the detonator. Hook a wire from the detonator to the top hole in the hourglass,
and hook the last wire from the battery to the bottom of the hourglass. The metal filings flowing
into the bottom of the hourglass will close the electrical circuit and detonate the bomb.
=========================
Make a small hole in the
bulb of the thermometer, inserting the first
wire from the battery directly into the bulb.
Next make a hole into the stem of the thermometer (Making sure it’s above the mercury level). Insert
the second wire directly from the detonator to the stem. Insert the third wire from the battery to
the detonator. When the thermometer is exposed to heat, the mercury will rise and close the
electrical circuit, detonating the bomb. Delay time can be adjusted by varying the intensity of the
heat source and the thermometer’s proximity to it.
Disclaimer
==========
If you fuck someone over, it ain’t my fault.
Ending Note
===========
If you need/want hand drawn schematics of any/all of these electrical timers, leave me mail
on one of the following boards.
[>:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:<]
[\ Give this board a call: /]
[/ \]
[\ Dragonfire..........[609] 424/2606 /]
[/ \]
[>:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:\:/:<]
Add A Comment