API Presents…
_________________
| Time Delay |
| by |
| Albatross |
|_______________|
This phile is for you bombers who want to get the hell away from the
scene of
the crime after the bomb go’s off, and here is what you need and how
you go about doing it.
Materials:
———
1 Micro LCD alarm (63-706 which is from
Radio Shack)
Some wire with different colors
Solder w/ Soldering iron
Clay or
playdo
Solar igniter
And a 9v battery
Procedure:
———
Now this shouldn’t take to long. First what you must do is take off the
backing
of the LCD alarm and look for the speaker. After you find the speaker
you need to cut it out
so that you can hook up your solar igniter to it. In
that process you will need to use the
solder & your own wire so that to solar
igniter can be streached to reach the opening
that you made for the pipebomb.
So connect the wire were the speaker would be.
Now
before you hook the wire’s up to the igniter you need to place the
9v battery between one of
the wires and the igniter (THIS MUST BE DONE IN
SERIES) because the alarm only gives off 1.5v
and the igniter needs 6v or more
which is way the 9v is need, even though it’s a tad too much
power but so what.
After the wire and battery is connected to the igniter close up the
backing of the alarm with tape or crazy glue. Now you can place the igniter
into the pipebomb
opening of where which the fuse would have gone. Place the
timer on the pipebomb with clay or
glue. But be careful because finger prints
can be left on the clay. Now all you need to do is
set the timer, which would
have been used for a wake-up beep, but now it will be used for a
fucking loud
explosion.
Pictures
——–
|^^^^^^^^^^^^^^^^^^^^|
| | **
| | !!
| ______________ | !! <= Solar igniter
| : 12:40 . : | 22222222
| :__.___.___**__: | 22222222
| . . | !!
| . .
| /\
| ` ‘ | / \
| (` ‘) | / \
| |
| | To Former To
| | <=
Speaker Igniter =>
| | ________________. ._______________
| | . .
^^^^^^^^^^^^^^^^^^^^ . .
-+–+-
: :
: 9v :
: :
——–
The reason why an alarm type of clock is used is because the battery
in the
clock will send voltage to the speaker to cause it to beep. But what
this process has done is
made the voltage cause the igniter to go off which
then causes the procedure.
Words from the wise:
"A fuse is a ignition of a bomb, but a timed delay is
the best
so that you can get away to bomb again."
Add A Comment