DarkStorm’s
Book
of
Compiled Articles on
Destruction, Crime,
and
Other Illegal Acts
"Are You Ready For A
Good Time?"
Version II.IX May 1991
Page
i
Pretext:
The author and co-authors of this
document, and authors of
the enclosed articles take absolutely no responsibilyity for the
assumed to be of whole mind and
competancy, so as not to warrant
the punishment of anyone for committing any act herein
described.
This file was composed as a documentary article, and in no
way reflects the
author’s views on law enforcement, its officers,
or its purpose. This article is an
informative look at the other
side. The readers do not have to nor are expected to take part
in
any of the acts herein described.
Inside this file one will find many detailed
descriptions on
how to get anything you ever wanted for free, how to make others
pay for
your goodies, how to destroy any thing and anyone at
will, and how to reek havoc upon the
populus. The author does not
condone this sort of action, and suggests that those who
really
want to do this should read no further, and go see a doctor.
Those who shun the
thought of my even compiling this file should
stop fucking reading this and delete it, since
it won’t do well
sitting next to all your other pristine files on how to track
hackers,
and how to protect yourself from setting eyes upon
pornography(*).
I hereby denounce
this article and have decided to delete it
from my drive, hopefully before I get the urge to
upload it to
the unsuspecting populus. Those concerned with my actions, rest
your eyes,
type: DEL DARK19-?.TXT <CR> at the DOS prompt, and get
some sleep.
Now that
those assholes are gone, everyone else come back,
all others should read on(including the guys
I told to see a
doctor). Enjoy this documentation, it is the result of many
sleepless
nights, many hours of downloading, buffering, and CHATs
to get the necessary information for
you all. By the time you
read this I will probably have about 40-60k more of texts to add
jailbreak, car theft,
atombombs (<–most humorous article, a must
read.), radar guns, unemployment checks while
you still have a
job, free food, anti-police warfare, phreaking(@), knife
fighting, the
making of viruses (comes complete with a starter
kit/file) etc. I’m sure you’ll all enjoy
these, but for now, just
read the ones here, it will take you long enough as it is.
Greek or something for ‘the
writing of the prostitutes’. Nice
writing I assume.
(@) There are some articles on
phreaking here, but I have
more….
Page ii
Pretext
——-
(cont.)
Read the articles carefully on
phreaking and on hacking, it
is important that you do not get caught trying out any of
these
things. There are some non-hacker/pirate articles here, such as
the noise filter
to rid yourself of linenoise forever, but I felt
it was important to the hacker, and even to
the amatuer.
Most all of the articles enclosed can be done with little
expended money,
some more than others. The only articles that do
not say how to build them, such as the HBO
decoder and the RADAR
jammer are stored as .ZIP files in the DRKSTRM?.ZIP. These are
for
you to read, and decide whether or not you want to spend the
money to get them. I would assume
that the guys have been shut
down, so I have been looking for a replacement for the RADAR
text
(I already have a couple of HBO texts on how to make em.)
The only other stuff in
here that claims to tell how to
build something that doesn’t is the couple of articles on
Blue
Boxing, (#’s 1-3), they are VERY informative to the newcomer, and
I left them ther
for the reading, besides, the texts on how to
build the Pearl Box and a bunch of others will
allow you to make
the Blue Box tones. Some of my own advice for you: Make the Gold
Box,
NEVER EVER make a Blotto Box, unless you wish to get a
lawsuit shoved so far up your asshole
that you’ll be tasting it
in your mouth for years to come. And unless you’re extrememely
demented, don’t make a Urine Box.
I am looking for the file "Jane’s All The World’s
Boxes", if
anyone has it, please upload it to any BBS I’m on, I would like
to
include it in my next issue of DRKSTRM. It has many many more
boxes that are not listed here,
nor anywhere else to my
knowledge. (To the authors of Jane’s ATWB, I only plan to use a
few of the better ones, I will not include it all.) [Still
looking....]
The HBO file on
page 123 works great. I use it now, and it’s
fine.
Also, if you have any intention of
doing anything mentioned
in this documnet, read the articles on it carefully. As in the
instance of the two Carding texts, the first says how to do it,
but yet, if you read the
second one, you will realize that had
you tried it now, you would probably be sitting in a
dingy cell
with a big Samoan named Biff who wants to make you his wife.
Go nuts!
Have a Hell of a time!
Page iii
Table of
Contents
—– — ——–
Subject: Page(s):
——- ——-
Pretext…………………………………………ii-iii
Table of
Contents………………………………..iv-vi
Special Thanks
To:…………………………………vii
Preaking and Hacking:
Bell
Trashing…………………………………1-2
Blue
Boxing…………………………………..3-5
Better Homes and Blue Boxing File
#1…………….6-8
Better Homes and Blue Boxing File #2…………….9-15
Better
Homes and Blue Boxing File #3……………16-20
Red
Boxing…………………………………….21
Hacker’s Atlas (By: The
Wyvern)………………..22-26
How To Build Various Boxes:
Noise
Filters………………………………..27-29
Neon
Box………………………………………30
White
Box……………………………………31-32
Black
Box……………………………………33-35
Urine
Box……………………………………36-37
Blotto
Box…………………………………..38-40
Beige
Box……………………………………41-44
Aqua
Box…………………………………….45-48
Cheese Box File
#1……………………………..49
Cheese Box FIle
#2……………………………..50
Brown
Box……………………………………51-52
Gold
Box…………………………………….53-54
Crimson
Box………………………………….55-56
Pearl
Box……………………………………57-58
Silver
Box…………………………………..59-61
Red
Box……………………………………….62
Green
Box……………………………………..63
The Book of Unlawfuls (By: Shadowspawn):
Section II —
Hacking…………………………..66
Lock Picking:
Combination
Locks…………………………….67-68
Door Knobs….(2
Files)……………………….69-75
Padlocks………………………………………76
Weird
Drugs………………………………………77-78
House
Breaking……………………………………..79
Demolition Files (By: King Arthur):
Number
2…………………………………….82-84
Page iv
Table of Contents
—– — ——–
(cont.)
Subject:
Page(s):
——- ——-
Bombs + Chemicals:
House-Hold Equivelences for
Chemicals…………..85-86
Misc. Compounds (By: The Prowler)………………87-88
Black Powder…………………………………89-90
Fire Bombs, Napalm,
etc……………………….91-92
Nitrogylcerine……………………………….93-94
Misc. Demolitions, Flares, Fuels,
etc………….95-101
Moltov Cocktail……………………………….102
The
Anarchist’s Micro-Cookbook (By: Maelstrom)………103-105
Cars:
How to Hotwire a
Car…………………………..106
How to Fuck one
up…………………………….107
Terror/ism:
Electronic
Terrorism…………………………108-110
Harmless
Terror……………………………..111-112
Carding:
Carding Text
#1……………………………..113-114
New Info on
Carding………………………….115-119
Free Shit:
Change……………………………………….120
Postage…………………………………….121-122
HBO………………………………………….123
HBO
Revised…………………………………..123b
HBO + Free PAY
TV……………………………124-128
Cable TV
Hacking……………………………128b-128
3-Way
Teleconferencing…………………………129
Horses……………………………………….130
Frequencies:
Bugs, Taps,
Mikes……………………………131-132
Federal
Frequencies………………………….133-136
Code
Words………………………………….137-138
Common 10 Codes (ie;
10-4)……………………..139
Quick Notes on Frequencies……………………..140
Information on Hacker Groups………………….141-142
Printed Hacker/CU
Magazines…………………..145-146
Misc. Catalogs on Crime/CU/Hacking
etc…………147-151
Page v
Table of Contents
—– — ——–
(cont.)
Subject: Page(s):
——- ——-
Info on Haking/Pirate Groups: (cont.)
Hacker BBS’s
etc………………………………152
The Butler’s
Disclaimer………………………..153
Last Minute Additions:
Excerpts from ‘Steal
This Book’:
People’s Chemistry………………………154-155
Fuses……………………………………156
Coin/Bill
Fraud…………………………157-158
Free Calls/Elimentary Red
Boxing……………159
Enclosure Notes:
Enclosed Hz-Generator and Misc.
Texts……………160
One Final Note to All From DarkStorm…………….161
Page vi
Special Thanks To:
—————–
BAH, JDS, Andersen, Streak, Gunner, McCarthy, Flare,
Starburst (AKA Mark Taverns), and Hayes.
\______Not his real name boys, a handle OK?
He’s insane, not Stupid.
An Extra Note of Thanks:
———————–
To the United States of America, for allowing me the
freedom
of expression, that of speech, and that of the press, which thus
granted me the
right to publish this article. (Sort of.)
{Not like I wouldn’t have published it if it were
illegal}
But thanks anyway; it’s the thought that counts.
One Last
note (I Hope)
———————-
Most of the BBS numbers have been left attached to
the
files, that is, accept for the Police Station, which I think only
appears once, but
no matter, you can still call most of these
BBS’s even if all their articles are not properly
denoted.
You can find most of these articles, plus many more on any
of the BBS’s
mentioned in this file, and on many others not
mentioned here. Many good BBS’s have message
sections devoted to
Law and Lawlessness.
Oh Yeah
— —-
might want to use a Search
program, or one with a Search (and
replace) key in it. Search in the forward direction from
the
Table of Contents for ‘Page ###’ and it will get you there faster
than you can. In
my next issue, or in a few at least, I will
divide it up a bit so you can load some of it, or
discard or
whatever to make it better for you. (Did it this time….)
Page vii
The Book Of The Unlawfuls
By: Shadowspawn
The Police Station
612-934-4880
-=] Section I [=-
-=] Bombs [=-
House Hold equivalants
----- ---- -----------
Name
Equivalant
---- ----------
acetic acid vinegar
aluminum oxide alumia
aluminum potassium sulfate alum
aluminum sulfate alum
ammonium hydroxide ammonia
carbon carbonate chalk
carbon tetrachloride cleaning fluid
calcium hypochloride
bleaching powder
calcium oxide lime
calcium sulfate plaster of paris
carbonic acid
seltzer
ethylene dichloride dutch fluid
ferric oxide iron rust
glucose corn
syrup
graphite pencil lead
hydrochloric acid muriatic acid
hydrogen peroxide
peroxide
lead acetate sugar of lead
lead tetrooxide red lead
magesium silicate
talc
magesium sulfate Epsom salts
naphthalene mothballs
phenol carbolic acid
potassium bicarbonate cream of tarter
potassium chromium sulfate chrome alum
potassium
nitrate saltpeter
sodium dioxide sand
sodium bicarbonate baking soda
sodium borate
borax
sodium carbonate washing soda
sodium choride salt
sodium hydroxide lye
sodium silicate water glass
Page 64
sodium sulfate glaubers'
salt
sodium thiosulfate photographers hypo
sulferic acid battery acid
sucrose cane
sugar
zinc choride tinner's fluid
------------ --------------
-=] Smoke Bomb [=-
--- ----- ---- ---
Mix:
4 parts sugar
6
parts potassium nitrate
Heat:
over low flame till melts stir well, then pour into
container.
Before it soldifies, put a few matches in for fuses.
*One pound of
this stuff will fill a block nicely with a thick
cloud of white smoke*
-=] Generic bomb [=-
--- ------- ---- ---
1) Aquire a glass
container
2) Put in a few drops of gasoline
3) Cap the top
4) Now turn the
container around to coat the inner surfaces and
then evaporates
5) Add a few drops of
potassium permanganate (<-Get this stuff
from a snake bite kit)
6) The bomb is
detonated by throwing aganist a solid object.
*AFTER THROWING THIS THING RUN LIKE HELL
THIS THING PACKS ABOUT
1/2 STICK OF DYNAMITE*
Page 65
-=] Section II [=-
-=]
Hacking [=-
--- ------- ---
-=] Conferance calls [=-
--- ---------- -----
---
*I recomend that you do this local*
To make a conference call with as many
people you want, just call
the operator ("0") and say "Hello, I'd like to make
a conference
call."
Then give the (first) Names (not pirate names, ether) and
the
phone #'s of the people you want to call And she'll do it.(hint:
make sure that the
people you are callin are expecting it.
because its damn annoying to be talking to 3 people
and having
the third be busy for the whole time
-=] Charge-a-call phones
[=-
--- ------------- ------ ---
On a charge-a-call phone (there blue but dont
have any coin
slots) take a hex wrench (with a hole in the middle) and remove
the screw
in the middle for an extention!
-=] Free calls [=-
--- ---- -----
---
From a pay phone, (the kind that gives you a dial tone AFTER you
put in the
dime) and drop in your dime. Then dial the #, then
put another dime in! It'll come back out
when you finish your
call.
{What!?!?! Some one tell me if he's serious!}
Page 66
[ Utopia Bbs: (213) 556-8629 ]
{=–=}{=–=}{=–=}{=–=}{=–=}{=–=}{=–=}{=–=}{=–=}{=–=}
{=–=} {=–=}
{=–=}
Picking Combination Locks {=–=}
{=–=} {=–=}
{=–=} Written by: The Byte Byter
{=–=}
{=–=} {=–=}
{=–=} The writer of this text file takes <all> resp- {=–=}
{=–=} onsibility for what this text file is used for.{=–=}
{=–=} Hopefully it will
only be used for illegal pur-{=–=}
{=–=} poses cuz i can’t think of a reason it can be
{=–=}
{=–=} used for legally. Well, on with the text file. {=–=}
{=–=} {=–=}
Ok, so ya say ya wanna
learn how to pick combination
locks…This text file should help you. As a matter of fact,
if
ya do it right, it will help you. First of all, let me tell you
about the set-up of a
lock. When the lock is locked, there is a
curved piece of metal wedged inside the little notch
on the
horseshoe shaped bar that is pushed in to the lock when you lock
it.
To
free this wedge, you must(must is a word used to much) you
usually(that sounds much better)
have to turn the lock to the
desired combination and the pressure on the wedge is released
a pick so you can open a
lock without having to waste all that
time turning the combination (this also helps when ya
don’t know
the combination to begin with). First of all, ya need to find a
hairpin.
What’s a hairpin? Well, just ask your mom. She will
have one. If she asks what its for, say ya
gotta hold something
together… If she says use a rubberband or use a paperclip,
tell
her to Fuck Off and Die and then go to the store and rip off
a box of 50 or so.
Ok,
enough stalling (yea, i was stalling). Once you have your
hair pin (make sure its metal), take
the ridged side and break it
off right before it starts to make a U-turn onto the straight
file, file down the other
end until it is fairly thin. You
should do this to many hairpins and file them so they are
of
different thicknesses so you can pick various locks. Some locks
are so cheap that ya
don’t even have ta file! But most are not.
Ok, now you have a lock pick. Now if ya haven’t
figured it out,
here’s how ya use it.
Page 67
You look at a lock to
see which side the lock opens from. If you
can’t tell, you will just have to try both sides.
When ya find
out what side it opens from, take the lock pick and stick the
filed end
into the inside of the horseshoe-shaped bar on
whichever side the lock opens from. Now, put
pressure on the
handle of the lock pick (pushing down, into the crack) and pull
the
lock up and down. The lock will then open because the pick
separated the wedge and the notch
allowing us thieves to open it.
Don’t say bullshit until you’ve tried it. because i
have gotten
lots of beer money from doin’ this to fellow students’
gym lockers. Also,
this technique works best on American locks.
I have never picked a Master lock before because
of the shape a
pressure of the wedge but if anyone does it, let me know how long
it
took. Also, the Master lock casing is very tight so ya can’t
get the pick in. So, if you’re
locking something valuable up,
use a Master, cuz at least ya know I won’t be picking it and
I’m
sure there aren’t that many that could. And when i say pick, i
don’t mean lighting a
stick of dynamite next to the lock, picking
is opening a lock without using force, making a
substitute key,
etc… If any of you believe that this information is not
sufficient for
picking an American lock, or any other kind
besides Master, leave me a message at
/\/\etalland 1 (503) 538-0761.
This concludes my text file on picking combination
locks.
My next text file will probably be "Picking key locks".
See ya
later.
The Byte Byter
^^^ ^^^^ ^^^^^
||| |||| |||||
^^^ ^^^^ ^^^^^
^^^ ^^^^ ^^^^^
^^^ ^^^^ ^^^^^
”’ ”” ””’
Page 68
This text file was written on 06/21/85.
][][][][][][][][][][][][][][][][][][][][
][ BROUGHT TO YOU BY ][
][ COMPUTER PIRATES OF
UTAH ][
][ COURTESY OF THE SAFEHOUSE ][ Ya it's in all CAPS.
][ (801)-264-8201 ][ I got
sick of trans-
][][][][][][][][][][][][][][][][][][][][ lating.
[+][+][+][+][+][+][+][+][+][+][+][+][+] I did put it to 80
[+] [+] columns though, ’stead
[+] [+] which takes up too much
[+][+][+][+][+][+][+][+][+][+][+][+][+] paper when printed and
[+] [+] read.
[+] WRITTEN
BY: DARC DEATHE [+] -=+ DarkStorm +=-
[+] [+]
[+][+][+][+][+][+][+][+][+][+][+][+][+]
THIS TUTORIAL WILL DEMONSTRATE HOW TO "PICK" A PIN TUMBLER LOCK.
USE OF THIS MATERIAL IS FOR LOCKSMITHS ONLY, ANY
USE OF THIS INFORMATION FOR ILLEGAL
PURPOSES IS FORBIDDEN AND
AGAINST THE LAW. (AS LONG AS WE ARE AT IT, DO YOU
WANT TO BUY
SOME LAND IN FLORIDA?) IN ORDER TO PICK A PIN TUMBLER
LOCK, YOU WILL REQUIRE FOUR ITEMS:
A LOCK,
YOU,
A PICK,
AND A TENSION WRENCH.
YOU CAN USSUALLY GET
THESE AT A LOCKSMITH STORE, IF YOU CAN NOT
FIND ONE NEAR YOU THERE WILL BE AN ADDRESS AT THE
END OF
THE ARTICLE THAT YOU CAN ORDER THEM FROM. HERE IS AN ILLUSTRATION
OF A PICK AND A
TENSION WRENCH:
________/ !________
PICK TENSION WRENCH
MOST PEOPLE
KNOW OF THE NEED FOR THE PICK, BUT HAVE NO IDEA WHAT
THE WRENCH IS FOR. IT IS VERY IMPORTANT
AND WITHOUT IT IT WOULD
BE IMPOSSIBLE TO PICK A LOCK.
Page 69
IN ORDER TO PICK A LOCK, WE MUST COUNT UPON THE IMPERFECTION OF
THE LOCK. BEFORE WE LOOK AT HOW TO ACTUALLY PICK
THE LOCK, WE WILL LOOK AT THE PARTS OF IT AND
HOW THE
IMPERFECTION PART FITS IN. HERE IS A DISSASSEMBLED LOCK:
/ / / /
\
\ \ \
SPRINGS -> / / / /
\ \ \ \
_ _ _ _
! ! ! ! ! ! ! !
! ! ! ! !
! ! !
DRIVERS ->! ! ! ! ! ! ! !
!_! !_! !_! !_!
_ _
! ! _ ! !
! ! ! ! ! ! ! !
\_/ \_/ \_/ \_/
_____________________
! : : : : : : : : !
HOUSING ->! : : : : : : : : !
! : : :
: : : : : !
!___: :_: :_: :_: :___!
! : : : : : : : : !
PLUG ->! : : : : : : :
: !
!______________________!
! !
! !
! !
!_____________________!
___
/ \
! !__ _ _
! \__ / \_/ \__
! \/ \
\__/——————- <- KEY
WHEN YOU INSERT A KEY INTO A LOCK, THE BOTTEM
PINS ARE PUSHED UP,
AND IF IT IS THE PROPER KEY, THE TOPS OF THE BOTTOM PINS WILL
MATCH
WITH THE SPOT WHERE THE PLUG AND HOUSING MEET, THUS
ALLOWING YOU TO TURN THE PLUG, AND OPEN
THE DOOR, ETC.. WHEN YOU
INSER THE KEY, THE BOTTOM PINS GO INTO THE VALLEYS OF THE KEY,
THUS MEANING THAT THE KEY MUST HAVE THE RIGHT HEIGHT VALLEYS TO
MAKE THE LOCK OPEN. PRETTY
ELEMENTRY, RIGHT?
WELL NOW WE CAN MOVE ON TO HOW TO PICK A LOCK.
Page 70
IN ORDER TO PICK A LOCK WE (AS I SAID BEFORE) DEPEND ON THE
INACCURACY OF THE
MANUFACTURING PROCESS. THE FIRST THING
TO DO IS TO INSERT THE TENSION WRENCH INTO THE LOCK AND
APPLY A
SLIGHT PRESSURE TO THE LEFT (OR RIGHT IF YOU WISH) SO THAT IF YOU
COULD LOOK INSIDE THE LOCK AT WHERE THE PLUG AND THE HOUSING
WOULD MEET, IT WOULD LOOK LIKE
THIS:
! !*! !
HOUSING ! !*!<—-Spring
! !*! !
__________! !*!
!___________
__________ !*! ____________
! !*!!
PLUG ! !_!!
! _ !
!
!*!<—–Pin
! \_/!
NOW A SLIGHT PRESURE IS ON THE PINS. BECAUSE THE PINS CAN
NOT BE
PRODUCED EXACTLY THE SAME, THERE IS ONE PIN WHICH IS THE WIDEST
AND THERE FORE
HAS MORE TENSION ON IT, AND ONE WHICH IS
THE THINNEST AND HAS ALMOST NO PRESSURE ON IT. WE NOW
USE THE
PICK TO >GENTLY< PUSH EACH PIN UP (AND TRY TO FEEL IT
WHEN YOU LET IT
DOWN) UNTIL WE FIND WHICH IS THE TIGHTEST ON AND
WHICH IS LOOSEST. GETTING THE FEEL FOR THIS
IS THE HARDEST PART
OF LOCK PICKING. NOW THAT YOU HAVE FOUND THE LOOSEST ONE,
GENTLY
PRESS IT UPWARD UNTIL YOU FEEL A SLIGHT REDUCTION IN
TENSION ON THE TENSION WRENCH. THIS WILL
HAPPEN WHEN
THE TOP OF THE BOTTOM PIN BECOMES EVEN WITH THE JUNCTION OF THE
PLUG AND THE
HOUSING. DO NOT RELEASE ANY TENSION FROM THE WRENCH
NOW! THE DRIVER WILL NOW BE TRAPPED IN THE
HOUSING AS
ILLUSTRATED HERE: (DON’T I DRAW PRETTY)
! !*! !
HOUSING ! !*!
!
! !*! !
___________! !_! !___________
_______________ ___________
! !*!
!
PLUG ! !*! !
! \_/ !
! !
NOW YOU CONTINUE THIS PROCESS WITH EACH OF
THE PINS UNTIL YOU
WORK YOUR WAY UP TO THE ONE THAT IS WIDEST. WITH SOME
PRACTICE YOU
CAN GET FAIRLY FAST AT THIS. I SUGGEST PRACTICING ON
A FOUR PIN TUMBLER LOCK THAT IS BOUGHT
FROM A HARDWARE STORE, THE
CHEAPER THE BETTER.
Page 71
I WOULD LIKE TO DISCUSS A PATICULAR CONFIGURATION
OF THE PINS NOW
THAT MAY PRESENT A PARTICULARLY HARD JOB TO PICK. THIS IS
GRAPHICLY
SHOWN HERE BY THE TWO MIDDLE PINS:
!*! !*! !*! !*!
!*! !*! !_! !*!
!*! !*!
_ !*!
!_! !*! !*! !_!
_ !*! !*! _
!*! !*! !*! !*!
!*! !_! !*! !*!
!*!
_ !*! !*!
!*! !*! !*! !*!
\_/ \_/ \_/ \_/
\_______________
WHEN YOU TRY TO PUSH THE 2ND PIN FROM THE LEFT UP, YOU WILL
UNAVOIDABLY BE PUSHING THE ONE IN
FRONT OF IT UP BE-
CAUSE OF IT’S LONG BOTTOM PIN. THE ONLY SOLUTION FOR THIS IS TO
GET A
SPECIAL PICK THAT LOOKS LIKE THIS:
\
\ _______________
\_/
THE
MAJOR PROBLEM WITH THIS IS THAT IT IS HARD TO INITIALLY
DETECT. THE REASON THAT IT MAKES IT
HARDER IF IT IS NOT
IMMEDIETLY APPERANT IS THAT YOU UnAVOIDABLY PUSH THE 3RD PIN FROM
THE LEFT UP INTO THE HOUSING, GETTING IT JAMMED:
! !*! !
HOUSING ! !_! !
!
_ !
! !*! !
__________! !*! !________
___________ !*! ________
!!*!!
PLUG !!*!!
!\_/!
Page 72
I WOULD ALSO
LIKE TO ADDRESS A TECHNIQUE CALLED RAKING. IT USES
A TOOL LIKE THIS:
\/\/\/\___________
BASICLY YOU "RAKE" IT BACK AND FORTH ACROSS THE
PINS, HOPING THAT
COMBINED WITH THE TENSION IT WILL GIVE YOU THE RIGHT COMBINATION.
THIS
WAY HAS BEEN KNOWN: FAST SOMETIMES, BUT IS NOT VERY
RELIABLE, AND I WOULD SUGGEST LEARNING TO
ACTUALLY "PICK" THE
LOCK.
EARLIER I PROMISED AN ADDRESS TO ORDER
LOCKSMITHING MATERIALS
FROM, SO HERE IT IS:
Garrison Protective Electronics
PO Box 128 <–Dropped to lower case to
Kew Gardens, New York, 11415 stand out better.
SOURCES: PERSONAL PRACTICE AND MANY EXCELLENT BOOKS FROM MENTOR
PRESS, IF YOU WOULD
LIKE THEIR CATALOG, SEND A Self-
Addressed-Stamped-Envelope TO:
The Intelligence
Library
Mentor Publications <–Ditto here.
135-53 Northern Blvd.
Flushing, NY
11354
AND ASK FOR ANY INFORMATION AVAILABLE ON THE INTELLIGENCE
LIBRARY. THIS
CONCLUDES OUR EXTRAORDINAIRELY GRAPHIC ARTICLE ON
LOCK PICKING.
IF YOU HAVE ANY
QUESTIONS, LEAVE E-MAIL FOR
— Darc Deathe –
ON MOST NATIONAL BBS’S.
Re-Edited by : Dark Star
Re-Hashed by : DarkStorm
Page 73
[ Utopia Bbs: (213) 556-8629 ]
]]]]]]]]]]#[[[[[[[[[[
]] LOCK PICKING [[
]] BY [[
]] ^^^NIGHTWING^^^ [[
]]]]]]]]]]#[[[[[[[[[[
SO YOU WANT TO BE A CRIMINAL. WELL, IF YOU ARE WANTING TO BE
LIKE
JAMES BOND AND OPEN A LOCK IN FIFTEEN SECONDS, GO TO HOLLYWOOD
BECAUSE THAT'S THE
ONLY PLACE YOUR GONNA DO IT. EVEN EXPERIENCED
LOCKSMITHS CAN SPEND 5 TO 10 MINUTES ON A LOCK
IF THEY'RE
UNLUCKY. IF YOU ARE LOOKING FOR EXTREMELY QUICK ACCESS,
LOOK ELSEWHERE.
THE FOLLOWING INSTRUCTIONS WILL PERTAIN MOSTLY TO THE
"LOCK-IN-KNOB" TYPE
LOCK, SINCE IT IS THE EASIEST TO PICK. IF
THERE IS SUFFICIENT DEMAND, I WILL LATER WRITE A
FILE DISCUSSING
THE OTHER FORMS OF ENTRANCE, INCLUDING DEAD-BOLT FIRST OF ALL,
YOU NEED
A PICK SET. IF YOU KNOW A LOCKSMITH, GET HIM TO MAKE YOU
A SET. THIS WILL BE THE BEST POSSIBLE
SET FOR YOU TO USE. IF YOU
FIND A LOCKSMITH WILLING TO SUPPLY A SET, DON'T GIVE UP HOPE. IT
(YOU CAN USE A FILE, BUT IT
TAKES FOREVER.)
THE THING YOU NEED IS AN ALLEN WRENCH SET (VERY SMALL). THESE
SHOULD BE SMALL ENOUGH TO FIT INTO THE KEYHOLE SLOT. NOW, BEND
THE LONG END OF THE ALLEN
WRENCH AT A SLIGHT ANGLE..(NOT 90 DEG.)
IT SHOULD LOOK SOMETHING LIKE THIS:
#1
\\
\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\\ (THIS IS THE HANDLE
\\\ THAT WAS
ALREADY
\\\ (HERE.)
\\\
\\\
\\\
NOW, TAKE YOUR PICK TO A
GRINDER OR A FILE AND SMOOTH THE END
(#1) UNTIL IT'S ROUNDED SO IT WON'T HANG INSIDE THE LOCK.
TEST
YOUR TOOL OUT ON DOORKNOBS AT YOUR HOUSE TO SEE IF IT WILL SLIDE
IN AND OUT
SMOOTHLY.
Page 74
NOW, THIS IS WHERE THE SCREWDRIVER COMES IN. IS IT
SMALL ENOUGH
FOR IT AND YOUR PICK TO BE USED IN THE SAME LOCK AT THE SAME
TIME, ONE
ABOVE THE OTHER ?
LETS HOPE SO, BECAUSE THAT'S THE ONLY WAY YOUR GONNA OPEN IT.
IN THE COMING INSTRUCTIONS, PLEASE REFER TO THIS CHART OF THE
INTERIOR OF A LOCK:
XXXXXXXXXXXXXXXXXXXXXXX| K
# # # # # # | E
# # # # | Y
* * | H
* * * * * * |
O
| L
| E
XXXXXXXXXXXXXXXXXXXXXXX|
#= UPPER TUMLER PIN
*= LOWER
TUMLER PIN
X= CYLINDER WALL
(THIS IS A GREATLY SIMPLIFIED DRAWING)
THE OBJECT IS TO PRESS THE PIN UP SO THAT THE SPACE BETWEEN THE
UPPER PIN AND THE LOWER PIN IS
LEVEL WITH THE CYLINDER WALL. NOW,
IF YOU PUSH A PIN UP, ITS TENDANCY IS TO FALL BACK DOWN,
RIGHT ?
THAT IS WHERE THE SCREWDRIVER COMES IN.
INSERT THE SCREWDRIVER INTO THE SLOT AND
TURN. THIS TENSION WILL
KEEP THE "SOLVED" PINS FROM FALLING BACK DOWN. NOW, WORK
FROM THE
BACK OF THE LOCK TO THE FRONT, AND WHEN YOU'RE THROUGH..... THERE
WILL BE A
CLICK, THE SCREWDRIVER WILL TURN FREELY, AND THE DOOR
WILL OPEN. DON'T GET DISCOURAGE ON YOUR
FIRST TRY! IT WILL
PROBABLY TAKE YOU ABOUT 20-30 MINUTES YOUR FIRST TIME. AFTER THAT
YOU
WILL QUICKLY IMPROVE WITH PRACTICE.
THIS IS BY NO MEANS THE MOST EFFICIENT WAY OF ENTERING A
HOUSE.
IF YOU WOULD LIKE ANOTHER ITEM OR TWO DEVOTED TO THESE OTHER
WAYS, LET THE SYSOP
KNOW.
Page 75
Displaying LOCKPICK.DOC:
+==========================================+
+ BE A LOCKPICK, GET INTO PADLOCKS +
+
"HOW TO CRACK A PADLOCK" +
+==========================================+
I must
attribute this message/file to reading I have done from
another files about this, and some
methods that I have made up on
my own.
This method has been only assured with
"Master" padlocks. They
are a very common padlock.. This might only work on those,
but
who knows..
First, pull the lock down, not so much as that it is
impossible
to turn, but just enough to be able to do the following: Turn the
knob around
clockwise (to the right) until you feel a small,
small resistance which will last 2-3 numbers
on the dial long.
You might try doing this a few times to find the exact number
that it
does this on, and not to be mistaken with another. Now,
add 5 to the number you have gotten.
Guess what? You have the
first number in the combonation!
There are a few mehods to get
the next number. I will tell you
both, one method, is very quick, but not always 100%
reliable.
The other is very difficult.
QUICK METHOD: This method will get the last two
numbers in the
combination in one step. --First, turn right and stop on the
first number
you got. Then, turn left and stop on the first
number again. Continue turning to the left to
the next marked
number. This means that the dial goes by five, and if your first
number
is 18, go to the 20.. Then turn to the dial to the right
again, while pulling down on the lock
(as hard as you pull to
unlock it if you have the right combo), and keep turning to the
right until you get to the 2nd number you've tried. If it doesn't
unlock, go on to the next
marked number on the dial. (For
instance, you're first number is 18, you tried 20 past right,
it
doesn't work, then try 25.) Keep doing this until eventually you
unlock it, or it
doesn't work. The most times that you would have
to do this is about 8.
HARD, BUT NEVER
FAILS METHOD: As in above, turn right to
your first number, and then turn left until you get
your first
number again. Begin pulling down on the lock again, and trying to
feel for a
little resistance. If it is very stiff, you probably
have the second number. If it is weak,
then continue turning. You
should try 2 or 3 times to make sure you get the same results.
right, while pulling down on
the lock between tries of oh, say
every 3 numbers, and eventually, CLICK, it will open.
//=DISCLAIMER: I am not held responsible for the use of this
information. This is for, let's
say, basic knowledge... Let's
say, if you ever forget your combonation, or it is very
important
you get into another lock.
This file/message has been brought to you by MASTER
MICRO!
Page 76
Wierd Drugs
By: Pa Bell
Bananas:
1. Obtain 15 pounds of ripe yellow bananas
2. Peel all and eat
the fruit. Save the peelings
3. Scrape all the insides of the peels with a sharp
knife.
4. Put all the scraped material in a large pot and add water.
5.
Boil 3 or 4 hours until it has attained a solid paste
considtency.
6. Spread
paste onto cookie sheets and dry in ofen for about 20
minutes. This will result in fine black
powder. Usually one
will feel the effects after smoking three to four cigarettes.
Cough syrup:
mix robitussion a-c with an equal amount of ginger ale and
drink.
The effects are sedation and euphoria. Never underestimate the
effects of any
drug! You can OD on cough syrup!
Toads:
1. Collect five to ten toads,
frogs will not work. The best kind
are tree toads.
2. Kill them as painlessly as
possible, and skin immediately.
3. Allow the skins to dry in a refrigerator for four to
five
days, or until the skins are brittle.
4. Now crush the skins into powder and
smoke. Due to its bad
taste you can mix it with a more fragrent smoking medium.
Page 77
Nutmeg:
1. Take several whole nutmegs and grind them up in an old
grinder.
2. After the nutmegs are ground. Place in a mortar and pulverize
with a pestle.
3. The usual dosage is about 10 or 15 grams. A larger dose may
produce excessive
thirst,anxiety,and rapid heart beat, but
hallucinations are rare.
{Hallucinations maybe
rare, but it does happen.}
{PS- To get hallucinations you must eat something like 30g,
which is extremely close to a lethal dose. If you die from this
one, I didn't tell you to do
it.}
Peanuts:
1. Take 1 pound of raw peanuts (not roasted)
2.
Shell them, saving the skins and discarding the shells.
3. Eat the nuts.
4. Grind up the skins and smoke them.
Page 78
How to
Break In to a House
By: Jim Meeker
Okay You Need:
COMPOUNDS}
2. A BB/Pelet Gun
3.
An Ice Pick
4. Thick Gloves
What You Do Is:
1. Call the ###-#### of
the house, or ring doorbell, To find
out if they're home.
2. If they're not home
then...
3. Jump over the fence or walk through gate (whatever).
4. If you
see a dog give him the mace or tear gas.
5. Put the gloves on!!!!!!!
6.
Shoot the BB gun slightly above the window locks.
7. Push the ice-pick through the hole
(made by the BB gun).
8. Enter window.
9. FIRST...Find the LIVING ROOM.
(they're neat things there!).
10. Then goto the Bed-room to get a pillow case. Put the
goodies in the pillow case.
11. Get out <-* FAST! -*>
Notes: You should have certian targets worked out (like
computers, Radios, Ect.,Ect.). Also
<-* NEVER *-> Steal
from your own neigborhood. If you think they have an
alarm...<-* FORGET IT! *->.
Page 79
Demolition Article #1
By:
King Arthur
Like all chemists I must advise you all to take the greatest
care and caution when you are doing this. Even if you have made
this stuff before.
nitroglyerin, the basic ingredient
in a lot of explosives such as
straight dynamites, and geletin dynamites.
---------------------------------------
Making nitroglycerin
---------------------------------------
1. Fill a 75-milliliter beaker to the 13 ml.
Level with
fuming red nitric acid, of 98% pure concentration.
2. Place the
beaker in an ice bath and allow to cool below
room temp.
3. After it has cooled,
add to it three times the amount of
fuming sulferic acid (99% h2so4). In other words, add to
the now-cool fuming nitric acid 39 ml. Of fuming sulferic
acid.
When mixing any
acids, always do it slowly and carefully
to avoid splattering.
4. When the two
are mixed, lower thier temp. By adding more
ice to the bath, about 10-15 degrees centigrade.
(Use a
mercury-operated thermometer)
5. When the acid solution has cooled to the
desired
temperature, it is ready for the glycerin. The glycerin
must be added in small
amounts using a medicine dropper.
(Read this step about 10 times!)
Glycerin is added
slowly and carefully (i mean careful!)
Until the entire surface of the acid it covered with
it.
6. This is a dangerous point since the nitration will take
place as soon as
the glycerin is added. The nitration
will produce heat, so the solution must be kept below 30
degrees centigrade! If the solution should go above 30
degrees, immediately dump the
solution into the ice bath!
This will insure that it does not go off in your face!
should be gently stirred. In a
normal reaction the
nitroglycerin will formas a layer on top of the acid
solution,
while the sulferic acid will absorb the excess
water.
Page 80
8.
After the nitration has taken place, and the
nitroglycerin has formed on the top of the
solution, the
entire beaker should be transferred slowly and carefully
to another
beaker of water.
When this is done the nitroglycerin will settle at the
bottem so the
other acids can be drained away.
9. After removing as much acid as posible without
disturbing
the nitroglycerin, remove the nitroglycerin with an
eyedropper and place it
in a bicarbonate of soda (sodium
bicarbonate in case you didn't know) solution. The sodium
is an alkalai and will nuetralize much of the acid
remaining. This process should be
repeated as much as
necesarry using blue litmus paper to check for the
presence of
acid. The remaining acid only makes the
nitroglycerin more unstable than it already is.
10. Finally! The final step is to remove the nitroglycerin
from the bicarbonate. His
is done with and eye- dropper,
slowly and carefully. The usual test to see if nitration
has been successful is to place one drop of the
nitroglycerin on metal and ignite it. If it is
true
nitroglycerin it will burn with a clear blue flame.
** Caution **
nitro is very sensative to decomposition, heating dropping, or
jarring, and may explode if
left undisturbed and cool.
Page 81
+++++++++++++++++++++++++++++++++++++
Demoltion
Article #2
By: King Arthur
I have decided to skip the article on mercury
fluminate for
a while and get right into the dynamite article.
Dynamite is
nothing more than just nitroglycerin and a
stablizing agent to make it much safer to use. For
the sake of
saving time, I will abbreviate nitroglycerin with a plain NG.
The numbers
are percentages, be sure to mix these carefully and
be sure to use the exact amounts. These
percentages are in
weight ratio, not volume.
------ ------
no. ingredients
amount
---------------------------------------
#1 NG 32
sodium nitrate 28
woodmeal 10
ammonium oxalate 29 {Note: Use NG From the
chapter on how to build it.}
{Have fun trying to find it!}
#2 NG 24 I am
contemplating writing,
potassium nitrate 9 or adding a chapter on how
sodium nitate 56
to make the stuff, it's
woodmeal 9 only slightly difficult.
ammonium oxalate 2
#3 NG 35.5
potassium nitrate 44.5
woodmeal 6
guncotton 2.5
vaseline
5.5
powdered charcoal 6
#4 NG 25
potassium nitrate 26
woodmeal 34
starch 10
#5 NG 57
potassium nitrate 19
woodmeal
9
ammonium oxalate 12
guncotton 3
Page 82
#6 NG 18
woodmeal 5.5
potassium chloride 4.5
chalk 2
#7
NG 26
woodmeal 40
barium nitrate 32
sodium carbonate 2
#8 NG 44
woodmeal 12
anhydrous sodium sulfate 44
#9 NG 24
potassium nitrate 32.5
ammonium oxalate 10
#10 NG 26
potassium nitrate 33
woodmeal 41
#11 NG 15
sodium nitrate 62.9
woodmeal 21.2
sodium
carbonate .9
#12 NG 35
sodium nitrate 27
woodmeal 10
ammonium oxalate
1
#13 NG 32
potassium nitrate 27
woodmeal 10
ammonium oxalate 30
#14 NG 33
woodmeal 10.3
ammonium oxalate 29
guncotton
.7
potassium perchloride 27
#15 NG 40
sodium nitrate 45
woodmeal
15
Page 83
#16 NG 47
starch 50
guncotton
3
#17 NG 30
sodium nitrate 22.3
woodmeal 40.5
potassium chloride
7.2
#18 NG 50
sodium nitrate 32.6
woodmeal 17
ammonium oxalate .4
#19 NG 23
potassium nitrate 27.5
woodmeal 37
ammonium oxalate 8
barium nitrate 4
calcium carbonate .5
Page 84
HouseHold
Chemicals
Household equivalants for chemicles
It has come to my attention
that m any of these chemicles
are sold under brand names, or have household equivalants.
here
is a list that might help you out.
acetic acid vinegar
aluminum oxide
alumia
aluminum potassium sulfate alum
aluminum sulfate alum
ammonium hydroxide
ammonia
carbon carbonate chalk
calcium hypochloride bleaching powder
calcium oxide
lime
calcium sulfate plaster of paris
carbonic acid seltzer
carbon tetrachloride
cleaning fluid
ethylene dichloride Dutch fluid
ferric oxide iron rust _Just buy graphite
at the
glucose corn syrup /Hardware store, it's used
graphite pencil lead/ to lube locks
and such.
hydrochloric acid muriatic acid_ Extremely diluted
hydrogen peroxide peroxide
\_/
lead acetate sugar of lead
lead tetrooxide red lead
magnesium silicate
talc
magnesium sulfate Epsom salts
naphthalene mothballs
phenol carbolic acid
potassium chromium sulf. chrome alum
potassium
nitrate saltpeter
sodium dioxide sand
sodium bicarbonate baking soda
sodium borate
borax
sodium carbonate washing soda
sodium chloride salt
sodium hydroxide lye
sodium sulfate glauber's salt
sodium thiosulfate
photographer's hypo
sulferic acid battery acid
sucrose cane sugar
zinc chloride
tinner's fluid
Page 85
Keep this list handy at all times. If you can't
seem to get
one or more of the ingredients try another one. If you still
can't, you can
always buy sm all amounts from your school, or
maybe from various chemical companies. When you
do that, be sure
to say as little as possible, if during the school year, and they
ask,
say it's for a experement for school.
Page 86
Misc. Compounds
By: The Prowler
<-> Mace Substitute <->
3 PARTS: Alchohol
1/2 PARTS: Iodine
1/2 PARTS:
Salt
Or:
3 PARTS: Alchohol
1 PARTS: Iodized Salt (Mortons)
<-> CO2 Canister Bomb <->
Take a Co2 canister and cut the top almost off
but leave a
little to form a hinge. Let out the Co2 and insert a M80 into it.
Insert
fuse throught hole in top. Close the top by welding or
epoxy glue. When ready to ignite just
light... Pretty neat eh?
<-> Unstable Explosives <->
Mix solid Nitric Iodine with househould ammonia. Wait overnight
and then pour off the
liquid. You will be left with a muddy
substance. Let this dry till it hardens. Now throw it
at
something!!!!
<-> Jug Bomb <->
Take a
glass jug, and put 3 to 4 drops of gasoline into it.
Then put the cap on, and swish the gas
around so the inner
surface of the jug is coated. Then add a few drops of potassium
permanganate solution into it and cap it. To blow it up, either
throw it at something, or roll
it at something.
Page 87
<-> Hindenberg Bomb <->
Needed:
1 Balloon
1
Bottle
1 Liquid Plumr
1 Piece Aluminum Foil
1 Length Fuse
Fill the
bottle 3/4 full with Liquid Plumr and add a little
piece of aluminum foil to it. Put the
balloon over the neck of
the bottle until the balloon is full of the resulting gas. This
is highly flammable hydrogen. Now tie the baloon. Now light the
fuse, and let it rise.
When the fuse contacts the balloon, watch out!!!
{Bullshit, it's nothing. Try something
better, use better
chemicals etc. You can make some nice stuff with gases.}
Page 88
How to Build Black Powder
By: Mr. Byte-Zap
Black powder can be prepared in a simple, safe manner. It
may
be used as blasting or gun powder.
Material required: Quantity:
-----------------
--------
potassium nitrate --- granulated --------- 3 cups
wood charcoal
--------- powdered --------- 2 cups
sulfur ---------------- powdered --------- 1/2 cup
alcohol - (whiskey, rubbing alcohol) ----- 5 pints
Water ------------------------------------
3 cups
heat source
2 buckets -- each 2 gallon capacity, at least one of which is
heat resistant (metal, ceramic, etc.) Flat
window screening ------- at least 1 ft. Square
cloth ----------------------- at least 2 ft. Square
note:
the above amounts will yield 2 ounds of black powder.
However, only the ratios of the
amounts of the ingredients
are important.
Thus, for twice as much black powder, double
all quantities
used.
Procedure:
---------
1) place alcohol in
one of the buckets
2) place potassium nitrate, charcoal, and sulfur in the heat
resistant bucket. Add 1 cup water and mix thoroughly with wooden
stick until all ingredients
are dissolved.
3) Add remaining water (2 cups) to mixture. Place bucket on heat
source and stir until small bubbles begin to form.
Caution: do not boil mixture. Be
sure all mixture stays wet.
If any is dry, as on sides of pan, it may ignite.
4)
Remove bucket from heat and pour mixture into alcohol while
stirring vigorously
Page 89
5) let alcohol stand about 5 minutes. Strain mixture through
around black powder and squeeze
to remove all excess liquid.
6) Place screening over dry bucket. Place workable amount
of damp
powder on screen and granulate by rubbing solid through screen
note: if
granulated particles appear to stick together and change
shape, recombine entire batch of
powder and repeat steps 5
& 6.
7) Spread granulated powder on flat dry
surface so that layer
about 1/2 inch is formed. Allow to dry. Use radiator , or
direct
sunlight. This should be dried as soon as possible,
preferably in one hour. The longer the
drying period, the
less effective the black powder.
Caution: remove from heat as
soon as granules are dry. Black
powder is now ready for use.
Page
90
Fire Bombs, Napalm etc.
By:
Lex Luthor
FIREBOMBS
Most fire bombs are simply gasoline filled
bottles with a fuel
soaked rag in the mouth (the bottle's mouth, not yours). The
original Molotov cocktail, and still about the best, was a
mixture of one part gasoline and
one part motor oil. The oil
helps it to cling to what it splatters on.
Some use
one part roofing tar and one part gasoline. Fire
bombs have been found whcih were made by
pouring melted wax into
gasoline.
NAPALM
About the best fire
bomb is napalm. It has a thick
consistancy, like jam and is best for use on vehilces or
buildings.
Napalms is simply one part gasoline and one part soap. The
soap is either
soap flakes or shredded bar soap. Detergents won't
do.
The gasoline must be
heated in order for the soap to melt. The
usual way is with a double boiler where the top part
has at least
a two-quart capicity. The water in the bottom part is brought to
a boil and
the double boiler is taken from the stove and carried
to where there is no flame.
Then one part, by volume, of gasoline is put in the top part
and allowed to heat as much as it
will and the soap is added and
the mess is stirred until it thickens. A better way to heat
it. It will hold its heat
longer and permit a much larger
container than will the double boiler.
NOTE: Anyone who lives after trying this, drop me a note, I want
to shake your
hand.
Page 91
MATCH HEAD BOMB
a devestating bomb. It is
set off with a regular fuse
A plastic Baggie is put into the pipe before the heads go
in
to prevent detonation by contact with the metal.
Cutting enough match heads to
fill the pipe can be tedious
work for one but an evening's fun for the family if you can
drag
them away from the TV.
FUSE IGNITION FIRE BOMB
A four
strand homemade fuse is used for this. It burns like
fury. It is held down and concealed by a
strip of bent tin cut
from a can. The exposed end of the fuse is dipped into the flare
igniter. To use this one, you light the fuse and hold the fire
bomb until the fuse has burned
out of sight under the tin. Then
throw it and when it breaks, the burning fuse will ignite
the
contents.
WHAT!?!?
Page 92
How to Make Nitroglycerin
By:
Karl Marx
CH2ONO2
! 3/2 N2 + 3 CO2
CHONO2 ----------> +
!
Ignition 5/2 H2O + 1/4 O2
CH2ONO2
(How Nitro explodes--note that the byproducts
are nothing but
nitrogen, carbon dioxide, water and oxygen)
Nitroglycerin
[heretofore Nitro] is a very powerful high-
explosive. I am not sure who invented it but he
probably
didn’t– the first person to make it probably blew himself up and
his freind
got the info off his notes. Well anyway, the next best
thing to Nitro is TNT which is ten
times harder to make but also
ten times safer to make. If you can’t use common sense then
dont
even TRY to make this stuff–a few drops can be lethal under
certain
circumstances.
To make Nitro:
== ==== ======
Mix 100 parts fuming
nitric acid (for best results it should
have a specific gravity of 50 degrees Baume’) with 200
parts
sulphuric acid. This is going to be HOT at first–it won’t
splatter if you pour
the nitric INTO the sulphuric but don’t try
it the other way around.
The acid solutions
together can disolve flesh in a matter of
seconds so take the proper measures for God’s
sake!!! When cool,
add 38 parts glycerine as slowly as possible. Let it trickle down
the
sides of the container into the acids or it won’t mix
thourily and the reaction could go to
fast–which causes enough
heat to ignite the stuff. Stir with a **GLASS** rod for 15
seconds or so then CARFULLY pour it into 20 times it’s *VOLUME*
of water. It will visibly
precipitate immediatly. there will be
twice as much Nitro as you used glycerin and it is easy
to
separate. Mix it with baking soda as soon as you have separated
it– this helps it
not to go off spontainously.
Page 93
::::::::::::::::::::::::::::::::::::::
NOTES: Parts are by
weight and the Baume’ scale of spicific
gravity can be found in most chem. books. You ca get
fuming
nitric and sulfuric acids wherever good chemicals or fertilizers
are sold. It is
positivly *STUPID* to make more than 200 grams
of Nitro at a time.
When mixing the stuff
wear goggles, gloves, etc. When I first
made the stuff I had the honor of having it go off by
itself (I
added too much glycerine at a time.) I was across the room at
the time, but I
felt the impact–so did the table it was on as
well as the window it was next to–they were
both smashed by only
25 grams in an open bowl.
Oh, yes, glycerine you can get at any
pharmacy and you need an
adult signature for the acids. Any bump can make Nitro go off if
that, if it gets old I
wouldn’t play catch with it.
Once you have made the Nitro and saturated it with
Bicarb.
you can make a really powerful explosive that won’t go off by
itself by simply
mixing it with as much cotton as you can and
then saturating that with molten ((parifine–just
enough to make
it sealed and hard.
Typically, use the same amounts (by weight) of each
Nitro, cotton
and parifine. This, when wrapped in newspaper, was once known as
"Norbin & Ohlsson’s Patent Dynamite," but that was back in 1896.
Page 94
I Zoxxon take no responsibility for the use of these items stated
herewithin. This
textfile is presented for informational use
only. The comments are added to most of the things
i have
attempted. All of the origional authors names have been deleted
for privacy. All
telephone numbers have been deleted also in
order to preserve secrecy.
Some
articles are from the ill-fated,
"THE POLICE STATION" BBS
Homemade Bombs (Just the way Mom used to make ‘em)
Explosive Devices An anarchist’s beginning
guide to explosives!
(or how to get back at those neighbors who told you to turn your
stereo down by blowing em up!)
1.Quickie… Take organic pool chlorine and mix it
with
vegetable shortening and put it someplace you don’t like. It
reacts by itself to
produce a very noxious white smoke and heat.
*make sure you are not around because the fumes
are harmful to
your health.
2.A pipe bomb (dangerous) Take a pipe, crimp (closed
at one
end) and pack it 3/4 full of paraffin (or any other semi-solid
with about the
same basic chemical structure), poke a number of
holes through the length of the paraffin. On
top of this put a
very thin steel (or other metal of that sort) wafer, make double
damn
sure** that it fits tightly all the way around. On top of
this put some high concentration HCL
(or similar acid). Close the
top now, stand it on end (paraffin end down), and get the fuck
thickness of the wafer. Watch out
for shrapnel.
*sure you will..more like 5-30 seconds. better to use a vial on
the
bottom ,stand the pipe upright, tie a string around it and
pull from far away.
3.
Snowball… Take ammonium iodide, flour, & water and form
this into a snowball. Leave this
’snowball’ somewhere where it
will do neat stuff when it dries out. (substituting some
magnesium flash powder for some (not all) of that flour helps
things a bit.)
Page 95
4.Fire bomb..
Take carbon disulfide and dissolve white
phosphorous in it. Put it in a stoppered bottle and
throw it at
something you would like to see on fire. When the CS2 evaporates,
it leaves
a film of P on what ever it hits, and it starts a fire
with the solvent vapors.
5. Light bulb bomb (click…booom!) Take a light bulb (brass
based preferably so
you can solder the wires back when you are
done) Unsolder the two wires that are soldered to
the brass (one
at the center of the base and one on the edge). Remove the base,
taking
care not to damage the bulb or filament, then take a pair
of needle nosed pliers and snap the
glass nipple that is now
exposed. Fill bulb (not completely),via the hole you just made,
with gasoline. Plug hole with silicone or something. Put the base
back on, resolder the wires,
screw into light fixture (with power
off of course!), turn on light…booom! *easier to use
a
mini-power-drill.
EXPLOSIVE INFO
WHEN PETROLEUM JELLY AND
POTASSIUM CHLORATE ARE MIXED IN A
ONE TO ONE RATIO BY WEIGHT, IT MAKES A TOTALLY SAFE WET
COMPOUND
BUT WHEN DRIED IT BECOMES HIGHLY EXPLOSIVE AND SHOCK SENSITIVE.
*store in
oil.
MIX 3 GRAMS OF POTASSIUM IODIDE AND 5 GRAMS OF IODINE IN A
BEAKER WITH 50 ML OF WATER. THEN ADD 20 ML OF AMMONIUM HYDROXIDE
[AMMONIA WATER 10%]. FILTER
THIS SUBSTANCE AND THE RESULTING
SOLID IS CALLED NITROGEN TRIIODIDE. WHEN THIS IS WET IT IS
feather will set it
off!!
Page 96
——————
Materials:
1.) Potassium Nitrate (KNO3)
or "Saltpeter".
2.) Sugar (Powdered is the best)
Procedure:
1.)
Mix the two together 1/2 Nitrate and 1/2 Sugar
2.) Take an old cooking pan, and melt the two
together. There
is NO way for it to ignite.(*BULLSHIT!)
3.) It should turn into a fudgey
looking compound. Pour this
compound into a rocket engine such as a cardboard tube, and set
a
fuse into the compound and let the compound harden.
* it is easier to use dry
mixed.(Good for smoke also)
Chlorate Mixtures
—————–
NOTE: The main ingredient for this experiment is potassium or
sodium chlorate. Both of these
will do equally well.
However,both may prove difficult to find. Probably the only way
to
get it would be to order it through a chemical supply house.
Materials:
———-
1) Potassium chlorate or sodium chlorate.
2) Powdered charcoal
3)
Powdered aluminum
4) Sulfur
Procedure:
———-
NOTE: There is no
set procedure for making chlorate mixtures.
The only special thing ABOUT chlorate mixtures is
that they have
a chlorate in them. Experiment with diffiernt proportions of each
of the
ingredients.All of the chlorate mixtures I made had no set
procedure and I just experimented
with the proportions of each of
the ingredients. Most of your mixture, however, should be
1) Make sure that you mix the sulfur and
charcoal and aluminum
first. You may grind these in a mortar and pestal to get a good
mix of these ingredients.
2) Add potassium chlorate or sodium chlorate. Mix them VERY
CAREFULLY in the mortar and pestal. DO NOT GRIND the mixture once
the chlorate has been added
or it will ignite and burn the shit
out of you.
3) You now may use the mixture for
whatever you want to.
Chlorate mixtures are some of the best compositions there are
and,
in my experiences, they are the best except for model rocket
propellant (procedure for making
this is given later).
Page 97
‘ Green Goddess ‘
—————–
Materials
———
1.) Zinc (Zn) <—NOTE: This is
not the same as Znc Oxide!
2.) Sulfur (S)
Procedure
———
1.)
Mix the two together 1/2 and 1/2.
2.) MAKE SURE that you mix them very well. The
best way to do
so, is to put the mixture in a jar with a lid and shake it up for
15-60
seconds, until it is all a grayish color.
3.) To ignite, use magnesium and a blow torch
(*matches don’t
work).
WARNING,this burns very very quickly, and produces smoke.
Also it
burns at a fairly high temperature(*about 600 deg. fah.). It will
surprise you
when it ignites. There will be a delay, and then all
of a sudden, it will flash up, and is
capable of burning the hell
out of you.
Nitrate Compound
—————-
Materials
———
1.) Potassium Nitrate (KNO3)
2.)
Aluminum Powder (dust)
3.) Sulfur (S)
Procedure
———
1.) Take 2
Tablespoons KNO3
2.) 2 Tablespoons AL
3.) 1/2-1 Tablespoon S
4.) Mix and shake,
until all is one solid color. Silver-grey.
5.) You can light this with a fuse or throw a
match into it to
light.
You may experiment with the ratios. Here are a few
tips:
a.) To make more smoke add more sulfur to the mixture.
b.) To make it burn slower,
add more Potassium Nitrate.
c.) To make it burn faster, add more Aluminum Dust.
Page 98
Ok guys, it’s me again with
another cool one…
The Missile Launcher.
It’s really simple to make, all you need
is:
1 empty can (gasoline can preferable) some gasoline
a paper bag
aluminum
foil
Now, just cut a piece out of the paper bag about the size of
your can. Roll it up
cigar-style and tape the very ends to keep
it in the same shape. Now, take you’re missile, and
stick about
3/4ths of it in a pool of gasoline, and let it soak up a little
while. Now,
on the upper limit of where the gas hit (the gas-line
I suppose you could call it) rip a small
piece almost completely
off, and bend it out. That is your fuse. Ok, now put aluminum
foil on the top. The amount of foil that you put on determines
the range of the missile. The
more the shorter…Makes it easier
to aim..
Now you’re ready. Put the missile in the
hole in the gas can, so
that the fuse is light-able, and light it. Stand back, it makes a
in the nose…
*how
that one works i have no idea..mine just burnt up…
This is really easy.
Just get a few bottles of rubber cement
and pour a line of it up to a wall and up the wall.
Then, light
it and watch! Great phun. <<—–Lame!
While on
the subject of light bulbs, why not apply this to a
car?
1] Take a hand drill or grind
stone and make a hole at the base
of the bulb.
2] Fill the bulb with amonium nitrate,
black powder, potassium
chlorate, or any explosive material.
Result: When the victim
turns on his/her headlights, you get a
fireworks show.
Page 99
How to have phun with someone else’s car. If you
really detest
someone, and I mean detest, here’s a few tips on what to do in
your spare
time.
Move the windshield wiper blades, and insert and glue tacks. The
tacks make lovely
designs. If your "friend" goes to school with
you, just before he comes out of
school. Take a lighter and put
it directly underneath his car door handle.
Wait…Leave…Listen. When you hear a loud "shit!",
you know he made it to his car
in time.
*variation: use dry ice in winter..
Remove his muffler and
pour approximately 1 Cup of gas in it.
Put the muffler back, then wait till their car starts.
Then you
have a cigarette lighter. A 30 foot long cigarette lighter.
This one is effective, and any fool can do it. Remove the top
air filter. That’s
it!
Or a oldie but goodie: sugar in the gas tank.
why your "friend"
has trouble with his/her lungs. Here’s one that
takes time and many friends. Take his/her car
apart then break
into thier house and reassemble it, in their living or bedroom.
Phun
eh?
If you’re into engines, say eeni mine moe and point to
something and remove it. They wonder why something doesn’t work.
Page 100
Pool Phun
———
First of all, you need know nothing about
pools. The only
thing you need to know is what a pool filter looks like.
Second, dress
casual. Preferably, in black. Visit your
"friends" house, the one whose pool looks
like fun!!) Then you
reverse the polarity polarity of his/her pool, by switching the
wires around. They are located in the back of the pump. This will
have quite an effect when
the pump goes on. In other words.
Boooooooooooommm! Thats right, when you mix +
wires
with - plugs, and vice- versa, the 4th of july happens
again. Not into total destruction???
pump on and get the
phuck out! When you look the next day,
phunny. The pool is dry.
If you
want permanent damage, yet no great display like my first
one mentioned, shut the valves of
the pool off. (There are
usually 2) One that goes to the main drain and one that goes to
the filter in the pool.
That should be enough to have one dead pump. The pump must take
in water, so when there isn’t any…
Practical jokes:
These next ones deal with true friends and there is *no*
permanent damage done. If you have a
pool, you must check the
pool with chemicals. There is one labeled orthotolidine. The
other is labeled alkaline (ph). You want orthotolidine. (It
checks the chlorine). Go to your
local pool store and tell them
you’re going into the pool business, and to sell you ortho-
possible. The solution is clear.
You fill 2 baggies with this
chemical. And sew the bags to the inside of your suit. Next,
go
swimming with your friend! Then open the bags and look like
you’re enjoying a piss.
Anyone there will turn a deep red! They
will be embarrassed so much, especially if they have
guests
there! Explain what it is, then add vinegar to the pool. Only a
little. The
"piss" will disappear.
Page 101
Ye Olde Moltov-Cocktail:
% <–Wick (dipped in
gasoline)
%%
_%_
I—I <—Cap
Liquor __ I % I
(or Gasoline) \ /
\
\ \ /–Bottle (obviously)
/ \-> \ /
I_______I<-/
I The I
ICoktailI
Label —-> Iof the I
I World i
I——-i
i_______i
One special note. I suggest using gas instead of
liquor for the
cocktail, seeing as how one can make for himself much better
cocktails.
Very Simple bomb. Just light and throw. There are many
variations to this,
which are in phile #2.
-Galin
{Special note…. I tried to
get you his ‘phile #2′, but I have
not found it anywhere. Anyone who has it should contact me,
or
add it to a copy, Just put it in the zip along with the rest of
the file.}
Page 102
The
Anarchist’s Micro Cookbook
by:
MAELSTROM
(A Book of
simple bombs for the average, and unscientific kid.)
Matchbomb:
Tin
foil, matches (wooden or paper), fuse
Cut off the sulfur tops of the matches. Put them
on the tin
foil. Pack tightly. Put the fuse into the middle of the bomb, and
pack very
tightly.
If not packed enough, you will only get a flame thrower.
With 3000 match heads,
you will get a six foot flame if not
packed enough. Otherwise it will explode, sending flames
in every
direction.
Variations of the Matchbomb:
Ping-pong
bomb:
Ping-pong ball, matches, fuse
Follow same directions as matchbomb,
but put the match heads
into a ping-pong ball. (Put a hole in it with an awl.) Stuff in
the match heads. Then add the fuse.
Average ping-pong ball takes over 100 match heads. When
lit,
throw, will explode in air if packed tight, otherwise, only a
small meltdown will
occur. A well packed ping-pong bomb will
explode sending a shower of flame and match heads for
over 25 ft.
The shell of the ping-pong ball will be set aflame and will melt
to whatever
it hits.
Jar bomb:
Babyfood jar, matches, fuse, cap
Ditto of
matchbomb. Pack tight, etc. Put hole in top of cap
with awl, and set in the fuse about 1/4
inch into the match
heads.
Normal size jar will hold over 2900 match heads. Pack them
When matches catch, will
blow the jar to shreads. Do not stand
too close, or you will get the shrapnel upside your
head.
Page 103
Shellbomb:
Bullet, fuse, pliers,
drill, hammer, nail
Remove the bullet from the live shell with the pliers. Point
away from yourself, just in case you screw up too badly. Save the
bullet for other bombs, etc.
Pour the blackpowder onto a table
top, paper cup, napkin, or other. Strike the back of the
bullet
shell with the nail and hammer to set it off. Now take the drill
and drill a hole
in the back of the shell. Refill with the
blackpowder. Crimp end with pliers. Put fuse in
hole. Light and
throw.
Explosion will shatter the shell, tearing it to pieces and
sending shrapnel everywhere. Enjoy it, but do not get hit. this
will ruin the fun.
Variation of Shellbomb:
Same as shell bomb, but leave the blackpowder in the
shell,
and just add the fuse to the open end, and then crimp a bit less
tightly.
Light and throw etc. Works basically the same way, just a
faster version.
Simple bomb:
Balloon, blackpowder (1 lb), fuse, duct tape, BB’s
Fill
balloon with blackpowder. Put fuse into open end of
balloon. Wrap balloon tightly with duct
tape. Put some BB’s in
between layers of duct tape. Do about 3 or 4 layers.
Light and
enjoy. Do not stand too close: BB’s fly fast and
hard.
For any of
these bombs, add some smokepowder from smoke
bombs to make it more noticable. Add some copper
fillings, or
powder for a green flame, or magnesium ribbon for a blinding
flash of white
light.
Page 104
To finish off I will throw in the infamous Maltov-Cocktail.
Moltov-Cocktail:
Whiskey bottle, cap, tampon, copper wire, gasoline
Drink the whiskey
first.
Ok, now you can begin. Fill the bottle with gasoline, and
screw on its cap. next
dip the tampon, yes, a tampon(or a cotton
ball for those of you who are wimps) in gasoline.
Wrap the copper
wire around the neck of the whiskey bottle, securing the tampon
in
place. Light the tampon and throw.
If the cap is on well, then you can hold it for as long
as
necessary, the cocktail will not explode until the glass
shatters.
Same as above, but fill the bottle with styrofoam
after
drinking the whiskey. Then fill with gasoline and proceed as
planned.
The
styrofoam will melt when the bottle explodes, and will
remain molten for a few seconds before
hardening again. This is
extremely painful if it gets on you, and will usually cause third
Can be used to take out wooden buildings or other substances
which
require a long heating before combustion. The styrofoam
will burn for a while hot enough to
ignite most wood structures.
Have a hell of a time, and remember,
there’s nothing
wrong with what you are doing, ’til you get caught.
cc
Page 105
How to Hotwire a Car
By: The Marauder
The easiest way is to just get under the dashboard and start
crossing
wires. Of course this could short out the entire
electrical system so there is a better
way.
When you get in the car, look under the dash. If it’s enclosed
then don’t
bother. Most new cars are like this unfortunately.
However you could cut through the dash. If
you do cut just do it
near the ignition.
Once you get behind or near the
ignition, look for two red
wires. In older cars this was the standard color code. If they
Pull out the two
wires and cross them. The car should start.
Page 106
CARS AND LIGHTBULBS etc
You
wanna fuck up someones car try putting a cup of sugar in
the gas tank or a raw egg. The sugar
seizes the engine bigtime! I
dunno what the egg does but once some dickless asshole put one
in
our gas tank and we had to get the tank removed to get it out. It
looked like an
Omelette..
Take the bottom of the light bulb off very carefully (*heat
it
up with a blowtorch to expand it) and make sure you do not
destroy any wires…You
should now have the metal part it one
hand and the glass part in another. Put the metal one
down. Fill
bottom of bulb with gunpowder and then put water on top. when
putting the
metal back in, be sure that the filament, the part
that lights up, touches both the water and
the powder.
When someone turns on the light…hahaha…
Also
try the same thing, but stop at the part where you put in
the stuff…Buy a size A Rocket
engine, and hook it up with the
igniter hooked to the wires on the filament…Point it
down,and
they’ll get a surprise when someone turns on the light!
Ok, like I saw the ol’ light bulb bomb trick done in this cool
movie,’The Soldier’…The
commie bad guy snuck into the CIA
director’s office,and took the glass part off the light
bulb. He
filled the glass part with gasoline (or some flammable stuff) and
liquid soap
to have the fire stick to the guy. He glued it back
together, and when he turned on the
light…
Page 107
Electronic Terrorism
By: King Tut
It starts when a big, dumb lummox rudely
insults you. Being
of a rational, intelligent disposition, you wisely choose to
avoid a
(direct) confrontation. But as he laughs in your face,
you smile inwardly—your revenge is
already planned.
Step 1: follow your victim to his locker, car, or house. Once
you have chosen your target site, lay low for a week or
more, letting your anger boil.
Step 2: in the mean time, assemble your versatile terrorist
kit(details below.)
Step 3: plant your kit at the desig- nated target site on a
monday morning between the
hours of 4:00 am and 6:00
am. Include a calm, suggestive note that quietly hints
at
the possibility of another attack. Do not write it
by hand! An example of an effective
note:
"don’t be such a jerk, or the
next one will take off your
hand. Have a nice day."
Notice how the calm tone instills fear. As if written
by
a homicidal psychopath.
Step 5: choose a strategic location overlooking the
target site.
Try to position yourself in such a way that you can see
his facial
contortions.
Step 6: sit back and enjoy the fireworks!
Assembly of
the versatile, economic, and effective terrorist kit
#1:
the parts you’ll need
are:
1) 4 aa batteries
2) 1 9-volt battery
3) 1 spdt mini relay (radio shack)
5) 1 solar ignitor (any hobby store)
6) 1
9-volt battery connector
Page 108
step
1: take the 9-volt battery and wire it through the relay’s
coil. This circuit should also
include a pair of
contacts that when separated cut off this circuit.
These contacts
should be held together by trapping them
between the locker,mailbox, or car door. Once the
door
is opened, the contacts fall apart and the 9-volt
circuit is broken, allowing the
relay to fall to the
closed postion thus closing the ignition circuit. (If
all this is
confusing take a look at the schematic
below.)
Step 2: take the 4 aa
batteries and wire them in succession.
Wire the positive terminal of one to the negative
except one positive terminal and one
negative terminal.
Even though the four aa batteries only combine to create
6 volts,
the increase in amperage is necessary to
activate the solar ignitor quickly and
effectively.
Step 3: take the battery pack (made in step 2) and wire one end
one prong of the solar ignitor. Then
wire the other
prong of the solar ignitor back to the open position on
the relay.
Step 4: using double sided carpet tape mount the kit in his
locker, mailbox,
or car door. And last, insert the solar
ignitor into the rocket engine (smoke bomb or
m-80).
Page 109
Your kit is now complete!
———><———
I (CONTACTS) I
I I
I — (9 VOLT)
I -
(BATTERY)
I —
I I
I (COIL) I
——///////——-
/———–
/ I
/ I
/ I
(SWITCH) I I
I I
I I
I I
I — (BATTERY)
I - ( PACK )
I —
I I
I I
—- —–
I I
*
(SOLAR
IGNITOR)
Page 110
Harmless Terror
By: The Prowler
To all those who do not wish to inflict
bodily damage on their
victems but only terror.
These are weapons that should be
used from high places.
1) The flour bomb.
Take a wet paper towel and pour a given
amount of baking flour
in the center. Then wrap it up and put on a rubber band to
keep
it together. When thrown it will fly well but when it
hits, it covers the victim with the
flower or causes a big
puff of flour which will put the victim in terror since as far
as they are concerned, some strange white powder is all over
them. This is a cheap method of
terror and for only the cost
of a roll of paper towels and a bag of flour you and your
friends can have loads of fun watching people flee in panic.
2) Smoke bomb projectile.
All you need is a bunch of those little round smoke
bombs and
a wrist rocket or any sling-shot. Shoot the smoke bombs and
watch the terror
since they think it will blow up!
3) Rotten eggs (good ones)
take some
eggs and get a sharp needle and poke a small hole in
the top of each one. Then let them sit in
a warm place for
about a week. Then you’ve got a bunch of rotten eggs that will
only
smell when they hit.
4) Glow in the dark terror.
Take one of those tubes
of glow in the dark stuff and pour the
stuff on whatever you want to throw and when it gets on
the
victim, they think it’s some deadly chemical or a radioactive
substance so they
run in total panic. This works especially
well with flower bombs since a gummy, glowing
substance gets
all over the victim.
Page 111
5) Fizzling panic.
Take a
baggie of a water-baking soda solution and seal it.
(Make sure there is no air in it since the
solution will form a
gas and you don’t want it to pop on you.) Then put it in a bigger
plastic bag and fill it with vinegar and seal it. When thrown,
the two substances will mix and
cause a violently bubbling
substance to go all over the victim.
Page 112
Carding
——-
First of all,
for those of you who do not know exactly what
carding is, well, it is the illegal use of
credit cards for the
purchase of items using them. This can be very useful.
Especially
when you are out of work such as I am. This file is
of course not for the professional carder,
but for the beginner
who does not know how to obtain or use a credit card to his/her
advantage.
Ok, the first thing you have to do is obtain a card from
somewhere.
The best way is to go to your local supermarket or
any store that uses credit cards. Then, you
watch them take out
the trash. After they have taken the trash out then you go over
when
the coast is clear and search through their trash. I know
that it can get messy, but don’t
conplain, jut think of the nice
things that you will be able to get out of it in the future.
You
are looking for carbons that they run te cards through. Then, you
take those home
and write down the name, card number, and the
experation date and the type of card that it is
(Mastercharge,
Visa, American Express, etc.) You make sure that you have cards
with a
good date on it. Next comes the good part, the ordering.
All you do when orderin is that you
call up a mail-order
and then you tell them what you want and your card number, and
then
they will ask for the place to send it to. Here comes the
hardest part. Here are some of your
options of places to send
it.
1) To a vacant house, apartment.
2) To a friend that
will deny it ever arived when they
inquire about it
3) To someones housee that you do
not know.
Let us examine these options in detail.
1) Sending to a vacant
house or apartment. This is done by
giving the address of the vacant house/apartment. Them,
when it
arives UPS and the mail man will leave it on the front porch or
bushes. Then you
just go by the house and pick it up. You must
take into account tat the possibility that
someone may move into
the house/apartment.
2) Sending to a friend and having him
deny that it arived. You
abribe your friend to pick up the packages when they arive at
his/her house and then he gives them to you. Then, when the fuzz
comes along to grab the guy
eho it got sent to your friend (and
parents who never saw him get it or it come) will deny it.
And
the fuzz won’t mess with them any more.
They will axamine the other possibilitys.
Page 113
3) Ok, you find
some nice older people that don’t know you and
that you do not live around. Then, you order
the stuff you want
and send it to that house. You call the people and make up an
origanal story of how they got the wrong address and they already
sent it and ask to pick it
up when it arrives. Make sure not to
give them your real name, address, phone number,
etc….
And the other way of obtaining a credit card is to get it from a
Elite
board. This is not the best way, since this way the card
is usually overdrawn by the time you
get it. Anothr way to card
and my favorite is to use the T.R.W. credit information system.
have a file explaining it
do not call it. IF you make mistakes
they do trace !
Here is a number for T.R.W.
/–Why not use the Blue Boxing
[408] 280-1901 <-/ file to call here?
Look for one in
your area with your dialer or consult your local
sysop or Elite board. For futher info on
T.R.W. consult a file
called T.R.W. information that is around some places. Ask for it
at your local good bbs.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
Stupid disclaimer: I
disclaim any of the above, I plee temperary
insanity!
This was intended only for the
knowledge for future reference.
This file does not approve or condon the use of credit cards
for
illegal uses. Merely to inform such as Newsweek informs on
cocaine, but does not
condon it’s use.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
in mind!!!
I plee temperary insanity!
This was intended only for the knowledge for future reference.
illegal uses. Merely to
inform such as Newsweek informs on
cocaine, but does not condon it’s use.
=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=-=
ABOVE DISCLAIMER IS A LOAD
OF BULLSHIT! <–{To whoever wrote this
{article, this line
{has a nice effect!
Page 114
* R e n e g a d
e L e g i o n *
Carding in the ’90s
by
The
Knight
The Night Elite BBS (617)623.7151 (RL
HeadQ)
- - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -
- - -
-
3/17/91
It used to be that a person could steal a carbon and find a house
that no one was occupying during the day, stick up a ‘Please
leave package’ note, and your
package would be there the next day
via overnight delivery.
This, of
course no longer works almost at ALL anymore unless your
in a relatively unpopulated state.
And, you’ll need a lot more
information than a carbon can give you to even get it mailed. I
me and has ALWAYS gotten
stuff through to the drop every attempt.
I will go through each step THOROUGHLY as if you were
a COMPLETE
beginner to carding just in case you ARE.
1……..Gathering Card Information
The first step is getting credit card #’s. The BEST
way I have
found to do this is to use CBI. You will need to get the
following info from
CBI:
Page 115
Credit card #
Social Security #
Address
FULL name
After you get
that information from CBI, it is neccessary to call
information and get the persons REAL phone
#. This will NOT be
used, but you’ll need it just in case, I’ll explain later.
2……..Setting up
The setup part is fairly easy, and this involves a slight change
reached at’, You must provide a
Direct Dial VMB. So a Direct Dial
VMB which will pick up with YOUR greeting is a must. This
will
impersonate a home answering machine.
Change the greetin to "Hello, I can not
answer your call…."
etc.
Last of all, Have ALL information ACCESSABLE and
EASY to find.
Tips:
- Run the card through a CC Checker for $1 if you got
the
CC from CBI.
Example: 800-554-2265 Bank : 1067 #
Merchant: 52 #
Type : 10 # (MC) 20 # (Visa)
Amount : 100# ($1.00)
Exp.date: 0193 (1/93, make it
up,the exp.
date is NEVER
checked)
- DON’T use American Express, they
always call the owner’s
number EVEN if you tell them your not at home!
3……..Ordering
This is when you actually PLACE the call. You MUST stay calm and
like the person with the
card is YOU. Play actor, ASK about
prices FIRST, and DON’T overdo it from one place. Example:
Just
order a loaded 486 with a 200 Mb hard drive, DON’T go and say
"Yeah, can I
have a gig on that?"
Page 116
Then, just order!
When it comes to credit card time, remember these:
used the same VMB for 2 months
before the police got around to
shutting it down. Overnight delivery is a flag for them
now.
- If they ask for "the number on the back of the card" or "The
didn’t know what the
initials were)
say: "Well, I’m not looking at my card right now." If you
need
to, use phrases like:
"My card is in my wallet in the car, I REALLY
don’t have
time to go dig it out right now. IS THIS GOING TO BE A PROBLEM!?"
They HATE that phrase and I usually get a turnaround of
80% saying, no sir, never mind. The
Key is, ACT LIKE YOU HAVE
A DATE IN 25 MINUTES DOWNTOWN, in other words, act rushed
and
pissed off. MOST BUSINESSMEN ARE, Don’t kiss their asses
because businessmen don’t!!
difference in area code of VMB and
Billing address, tell them its
your summer house or relatives house, but DON’T BRING IT UP.
- If they ask for # at Billing address, give them the REAL #,
they will check with
Information only, but be sure to emphasize
that the number you gave them for the billing
address is NOT the
number your at! Make SURE you say you can be contacted at the VMB
number for the next week or so.
- If they tell you they can’t ship to a different
address than
the billing address, stand FIRM, say "Is there ANY way I can
change
this? Can you call my bank or something?!!?" Sound
ANNOYED, DON’T give up and in about
40% of my calls, the person
changed their mind.
- Do NOT check your VMB every 10
minutes, that looks weird.
- DO NOT even TRY to get HST’s, those are flagged UP the
BUTT,
and I’d GUESS that soundblasters will be soon.
Page 117
- Tell them you NEED the stuff delivered on X day, and INSIST,
KEEP insisting! Make SURE. Tell them, "I need to do work on
XX and I want the machine
then"
- If you are sending a LOT of machines etc. to ONE drop, Make
the
package ATTENIONED to John Smith or whoever, have ALL the
packages addressed to the same
person. Tell them your sendin it
to a business associate, relative, wife, whatever. We don’t
need
the stuff flagged down at Fed Ex.
The key phrase is "I really don’t
have time for this"
And remember: YOUR the CUSTOMER, they don’t know you AREN’T
the
card holder, for christ sake, ACT LIKE IT!! DON’T take second
rate service!!
4……..Drops
The drop is very important nowadays, you can NOT just
leave a
note, so don’t even bother.
4 methode
1. Vacant House
Method
Put blankets up on windows in house and sit in and sign for
packages. This
method, works, and there are no future problems.
FUTURE problems, they MAY not beleive you
live there etc. so this
method is a BIT risky
2. Freind’s house - Robbed
method
Tell a freind to sign at HIS house, then call the police at
6.00pm and say
"I JUST came home and my door was ajar and some
lights were on, I Don’t think anything
was stolen, but what
should I do?"
Make sure ALL stuff is cleared out and
its safer if the person
doesn’t even have a computer. When the police come by asking
about packages on X day, bring up your break in. To be safer,
send something one day late and
refuse to sign for it and bring
it up to the police.
Page 118
3. Freind’s house - Vacant method
Sign for the stuff at a
freind’s house, GET IT OUT, and when the
police come say " I was on vacation for 3 weeks,
I don’t know
ANYTHING about packages" There’s NOTHING they can do, and your
set.
The advantages to the last 2 methods are:
You won’t get bored if
nothing comes
You won’t get caught breaking & Entering
You won’t get caught by Fed
ex guy and not get stuff
I have done #2 AND #3 with success, so it CAN be
done.
Extra tip: Try US Mail, they haven’t caught on yet to the drop
deal!
Have fun and don’t get caught!
- -
RL
Page 119
%%:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::%%
%% Coin Changer Fraud %%
%% Written by- Electronic Rebel %%
%%:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::%%
%%Lost City of
Atlantis……..215-844-8836 300/12/24 35 Meg%%
%%Infinity’s Edge…………..805-683-2725
300/1200 10 Meg%%
%%:::::::::::::::::::::::::::::::::::::::::::::::::::::::::::%%
Have you ever seen one of those really big changer machines in
airports, laundrymats or
arcades that dispense change when you
put in your 1 or 5 dollar bill? Well then, here is an
article
for you.
1) Find the type of change machine that you slide in your bill
length wise, not the type where you put the bill in a tray and
then slide they tray in!!!
crumpling up into a ball.
Then smooth out the bill, now it
should have a very wrinkly surface.
3) Now the hard
part. You must tear a notch in the bill on the
left side about 1/2 inch below the little 1
dollar symbol (See
Figure).
4) If you have done all of this right then take the bill and
go
out the machine. Put the bill in the machine and wait. What
should happen is: when
you put your bill in the machine it
thinks everything is fine. When it gets to the part of the
bill
with the notch cut out, the machine will reject the bill
and (if you have done it
right) give you the change at the same
time!!! So, you end up getting your bill back, plus the
change!!
It might take a little practice, but once you get the hang of it,
you can get
a lot of money!
!——————————–!
! !
! (1) /——-\ (1)
!
! ! ! !
! ! Pic. ! !
! (1) /\ \——-/ (1) !
! !! !
!—–/
\———————–!
\——-Make notch here. About 1/2 "
down from
(1)
P.S. Sorry for the "text work" but you should be able to get
a good
idea. If not, I can be reached on Infinity’s Edge bbs.
Have fun!
Call The Works
BBS-1600+Textfiles!-[914]/238-8195-300/1200
Always Open
Page 120
Free Postage!!
By: TAP Magazine
The increasing cost of postage to mail letters and packages
is bringing down our
standard of living. To remedy this
deplorable situation, some counter control measures can
be
applied.
For example, if the stamps on a letter are coated with
Elmer’s Glue by
the sender, the cancellation mark will not
destroy the stamp:
the Elmer/s drives to form
an almost invisible coating that
protects the stamps from the cancellation ink. Later, the
water and reuse the stamps.
Furthermore, ecological saving will
also result from recycling the stamps. Help save a
tree.
The glue is most efficently applied with a brush with stiff,
short
bristles. Just dip the brush directly into the glue and
spread it on evenly, covering the
entire surface of the stamp.
It will dry in about 15 minutes.
For mailing packages, just follow the same procedure as
outlined above; however, the
package should be weighed and
checked to make sure that it has the correct amount of postage
on
it before it is taken tothe Post Office.
Removing the cancellation and the
glue from the stamps can
be easily accomplished by soaking the stamps in warm water until
a paper towel to dry.
Processing stamps in large batches saves
time too. Also, it may be helpful to write the word
‘Elmer’ at
the top of the letter (not on the envelope) to cue the receiving
party in
that the stamps have been protected with the glue.
We all know that mailing packages
can be expensive. And we
also know that the handicapped are sometimes discriminated
against in jobs. The Government, being the generous people they
are, have given the blind free
postal service.
Page 121
Simply address you
envelope as usual, and make one
modification. In the corner where the stamp would go, write
in
(or stamp) the words ‘FREE MATTER FOR THE BLIND". Then drop you
package or
letter in one of the blue fedral mailboxes.
DO NOT TAKE THE LETTER TO THE POST OFFICE,
OR LEAVE IT IN YOUR
MAILBOX.
Sounds very nice of the government to do this,
right? Well,
they aren’t that nice. The parcel is sent library rate, that is
below third
class. It may take four to five days to send a
letter to just the next town.
This
too is quite simple, but less effective. Put the
address that you are sending the letter to as
the return address.
If you were sending a $20 donation to the pirate’s Chest, you
would put our address (po box 644, lincoln ma. 01773) as the
return address.
Then
you would have to be carless and forget to put the
stamp on the envelope. A nice touch is to
put a bullshit address
in the center of the envelope.
Again, you MUST drop the
letter in a FEDRAL mailbox. If the
post office doesn’t send the letter to the return address
for
having no stamp, they will send it back for the reason of "No
such
address".
Example–
Pirates Chest
P.O. Box 644
Lincol, Ma.
01773
Tom Bullshit
20 Fake Road
What Ever, XX
99851
One last thing you might try doing is soaking a cancelled
stamp off
of an envelope, and gluing it onto one you are sending.
Then burn the stamp, leaveing a
little bit to show that there was
one there.
Page 122
Displaying HBO.DOC:
///PAY TV DECODER PLANS///
MATERIALS
REQUIRED:
1 - Radio Shack mini-box ( #270-235)
1 - 1/4 watt resistor, 2.2k-2.4k
ohm (RS #271-1325)
1 - 75pf-100pf variable capacitor (Hard to find)
2 - F61a
chassis-type coaxial connectors (RS #278-212)
12" - No. 12 solid copper wire
12" - RG59 coaxial cable
///INSTRUCTIONS///
1. Bare a
length of No. 12 gauge solid copper wire and twist
around a 3/8" nail or rod to form a
coil of 9 turns. Elongate
coil to a length of 1 1/2" inches and form right angle bends
on
each end.
2. Solder the varible capacitor to the coil. It doesn’t matter
where you solder it, it still does the same job. The best place
for it is in the center with
the adjustment screw facing upward
Note: When it comes time to place coil in box, the coil
must be
insulated from grounding. This can be done by crazy-glueing a
piece of rubber to
the bottom of the box, and securing the coil
to it.
3. Tap coil at points 2 1/2
turns from ends of coil and solder
to coaxial chassis connectors, bringing tap leads through
holes
in chassis box. Use as little wire as possible.
4. Solder resistor to
center of coil and ground other end of
resistor to chassis box, using solder lug and small
screw.
5. Drill a 1/2" diameter hold in mini-box cover to permit
adjustment
of the variable capacitor from the outside. Inspect
the device for defects in workmanship and
place cover on
mini-box. Tighten securely.
6. Place device in line with existing
cable on either side of
the coverter box and connect to television set with the short
piece of RG59 coaxial cable. Set television set to HBO channel.
7. Using a plastic
screwdriver (non-metalic) adjust the varible
capacitor until picture tunes in. Sit back,
relax, and enjoy!!!
Page 123
Press S to Stop,
P to Pause.
With most of the cable companies scrambling their signals on
most all
new and some old channels I thought I’d update and
revise my first version (1.0) of Pay Tv
Decoder Plans.
Due to different scrambling systems, you might find it
neccesary to
change the range and values of the variable
capacitator. I’ve also added a wiring diagram to
help you with
designing the circut. If you have any questions just leave
a message on
the board listed at the end of the article.
(Tom) Hackerman
///PAY
TV DECODER PLANS///
Version 2.0
///MATERIALS REQUIRED:///
1 -
Radio Shack mini-box ( #270-235)
1 - 1/4 watt resistor, 2.2k-2.4k ohm (RS #271-1325)
1 -
75pf-100pf variable capacitor (Very hard to find)
2 - F61a chassis-type coaxial connectors (RS
#278-212)
12" - No. 12 solid copper wire
12" - RG59 coaxial cable
///INSTRUCTIONS///
1. Bare a length of No. 12 gauge solid copper wire and
twist
around a 3/8" nail or rod to form a coil of 9 turns. Elongate
coil to a
length of 1 1/2" inches and form right angle bends on
each end.
2. Solder
the varible capacitor to the coil. It doesn’t matter
where you solder it, it still does the
same job.
The best place for it is in the center with the adjustment screw
facing upward
Note: When it comes time to place coil in box, the coil must
be insulated from
grounding. This can be done by crazy-
glueing a piece of rubber to the bottom of the box, and
securing the coil to it.
3. Tap coil at points 2 1/2 turns from ends of coil
and
solder to coaxial chassis connectors, bringing tap leads
through holes in chassis
box. Use as little wire as possible.
Page 123b
4. Solder resistor
to center of coil and ground other end of
resistor to chassis box, using solder lug and
small
screw.
Diagram: Your circut and design should look something like
————————-
! !
! !
! C !
!
———–F16a
G 2.2k O — !
N—-\/\/\— Vc !
D 1/4w I — !
!
———–F16a
! L !
! !
! !
————————-
5.
Drill a 1/2" diameter hold in mini- box cover to permit
adjustment of the variable
capacitor from the outside.
Inspect the device for defects in workmanship and place
cover on minibox. Tighten securely.
6. Place device in line with existing cable on
either side ofthe
coverter box and connect to television set with the short pieceof
RG59
coaxial cable. Set television set to HBO channel.
7. Using a plastic screwdriver
(non-metallic), adjust the
varible capacitor until picture tunes in. Sit back,
relax,
and enjoy!!!
Have fun…
(Tom) Hackerman
O S U N Y B B
S
(914) 725 - 4060
_ _
| (_><_) And if you enjoyed this Text-file, Call:
_\ 300/1200 N81
1200 only from 6:00p to 12:00mid
____________ \>\ 10 Megabytes on-line Anti-RBBS and
Networks
/ > \ SysOps: Jason Scott & Terror Ferret
| ======= (900) Text-files
on-line!
Press [Enter] to continue:
Page 123c
..Digital Logic Data
Service..
-=+*> The Stone Ship AE/BBS/Gaming System * 312-772-0347
<*+=-
Captured From The Ripco BBS <> 528-5020 <> 4/9/88
most of you are a bit in left field about this cable shit… some
of the methods brought up
are really out of date especially with
the systems around the chicago area.
a few
explainations are in order i guess…
first off, the bit about tuning your tv up or
down one channel is
valid but i doubt if any systems in the country are still using
it.
in that type of system none of the channels are scrambled,
only locked out. most of these
systems were 35 channel or less
and used a converter which had no remote control. the idea
pot or slug for each
channel. if you ordered basic service, the
company simply re-tuned all the pay channels off
band somewhere.
if you changed serviced and wanted one of the pay channels,
either they
sent out a new box or sent someone out to re-tune the
old one. turning the tv up or down one
channel would work but its
a whole lot easier to get a cable ready tv.
the
companies got smart to this and started to use devices called
traps and filters. traps are
small round cylinders which do what
the name implies, they trap one or a band of channels.
they are
made up of a simple combination of coils and capacitors which are
tuned to
block out certain frequencies. thus if the company
wanted to lock out channel 23, a channel 23
trap would be
installed somewhere between the pole and the customers house. it
should be
noted that in some areas all the premium channels are
together, lets say starting with channel
30 and going through
channel 36. in this case if the subscriber elects not to take any
of those channels, a single filter is installed to block out all
7 channels. the simpliest way
around a trap is just
to remove it. the two problems with this are
1) since the trap is
gone, if the company checks or does an
install in the area and finds it missing, they’ll just
stick
another one in.
2) traps usually have collar locks on them meaning
you can
sit there all day turning it but it’ll never back out.
footnotes to this are
1) if the
trap is removed, opened then modified and
re-installed, it will remove problem 1.
2)
the collar lock tools are avaiable from major
electronic distributors.
Page 124
filters look similar to traps but work opposite meaning
they have
to be in the line to get the channel. usually you can tell if
you need a
filter if you have one or more channels which ‘beep’
in the sound and have bars running
through the picture. this beep
and bar shit is injected into the cable channel and the
filter
removes it via a deep notch, narrow band filter.
all of the above is a
breif explanation of the older systems out
there. take note that none of those systems really
scramble
anything, just either hide the channels, block them or inject
noise to stop
common tv and vcr’s from getting the signal. it
should also be noted that most systems today
do not used the
above methods exclusively. most systems use some kind of
scrambling but
many use combinations of different things. one
example is chicago cable which services the
south and east areas
of chicago. on thier system, the 5 pay channels are setup so that
2
of them are trapped, 1 requires a filter and the other 2 are
scrambled by a encoding method
called scientific atlanta. one
point to keep in mind is that the chicago cable company does
not
use what is called ‘an addressable system’ at the current time.
i’ll explain this
later along with some notes on group w’s
system.
in general some other things to
keep in mind are besides the beep
and bar method, you will always get audio from a
scrambled
channel. basically what i am saying is that the audio is never
altered in any
encoding technique. the exception to this could be
a decoder known as the oak sigma which is
rumored to
have a digital encoding scheme similar to the type used on
satellite. in any
cable system there is always a way around it.
in larger more up to date systems like
group w of chicago, it is
easier to order the equipment needed than try to screw around
with their box. one warning in order is that whatever you buy may
become junk soon and there
is always the poss