Carbon-Tet Explosive

Carbon-Tet Explosive by the Jolly Roger

A moist explosive mixture can be made from fine aluminum powder combined
with carbon
tetrachloride or tetrachloroethylene. This explosive can be
detonated with a blasting cap. />
Material Required Source
—————– ——
Fine aluminum bronzing
powder Paint store
Carbon Tetrachloride Pharmacy, or fire
or extinguisher fluid

tetrachloroethylene Dry cleaners, pharmacy
Stirring rod (wood)
Mixing container (bowl,
bucket, etc.)
Measuring container (cup, tablespoon, etc.)
Storage container (jar, can,
etc.)
Blasting cap
Pipe, can or jar

Procedure:
———

1) Measure out two parts aluminum powder to one part carbon tetrachloride or

tetrachlorethylene liquid into mixing container, adding liquid to powder
while stirring with
the wooden rod.
2) Stir until the mixture becomes the consistency of honey syrup.

CAUTION: Fumes from the liquid are dangerous and should not be inhaled.

3) Store
explosive in a jar or similar water proof container until ready to
use. The liquid in the
mixture evaporates quicky when not confined.

NOTE: Mixture will detonate in this manner
for a period of 72 hours.

How to Use:
———-

1) Pour this
mixture into an iron or steel pipe which has an end cap threaded
on one end. If a pipe is not
available, you may use a dry tin can or glass
jar.
2) Insert blasting cap just beneath
the surface of the explosive mix.

NOTE: Confining the open end of the container will
add to the effectiveness
of the explosive.

Compiled by: RFLAGG

• Carbon-Tet Explosive
• UREA NITRATE EXPLOSIVE
• Bullseye (Low-High) Explosive
• Plastic Explosive Filler
• The Improvised Munitions Black Book, Section V (Part III)

Carbon-Tet Explosive by the Jolly Roger

A moist explosive mixture can be made from fine aluminum powder combined with carbon
tetrachloride or tetrachloroethylene.
This explosive can be detonated with a blasting cap. />

Material Required Source

—————– ——

Fine aluminum bronzing powder Paint store

Carbon Tetrachloride Pharmacy, or fire

or extinguisher fluid

tetrachloroethylene Dry cleaners, pharmacy

Stirring rod (wood)

Mixing container (bowl, bucket, etc.)

Measuring
container (cup, tablespoon, etc.)

Storage container (jar, can, etc.)

Blasting cap

Pipe, can or jar

Procedure:

1.Measure
out two parts aluminum powder to one part carbon tetrachloride or tetrachlorethylene liquid into
mixing
container, adding liquid to powder while stirring with the wooden rod.
2.Stir
until the mixture becomes the consistency of honey syrup.
CAUTION: Fumes from the liquid are
dangerous and should not be inhaled.
3.Store explosive in a jar or similar water proof
container until ready to use. The liquid in the mixture evaporates quicky
when not confined.

NOTE: Mixture will detonate in this manner for a period of 72 hours.

How
to Use:

1.Pour this mixture into an iron or steel pipe which has an end cap threaded
on one end. If a pipe is not available, you may
use a dry tin can or glass jar.

2.Insert blasting cap just beneath the surface of the explosive mix.

NOTE: Confining
the open end of the container will add to the effectiveness of the explosive.

Compiled
by: Exodus

• Carbon-Tet Explosive
• UREA NITRATE EXPLOSIVE
• Bullseye (Low-High) Explosive
• Plastic Explosive Filler
• The Improvised Munitions Black Book, Section V (Part III)