Home made igniters

- Home made igniters -

This file will explain basicly how to make your own igniters. If
your the kind who
likes to have everything made by yourself so your sure
everything will work. Igniters can be
made from things you have in your home.
All you need is:
1 Light bulb
2 thin solid
wires
Take your light bulb and break off the outside glass. Try not to break the

filament inside. Once you have the filament you are going to have to
stretch it without
breaking it. After that is done, cut of a peice about
an inch long. Then take your to thin,
but solid wires. Rap one end of
the filament about 2 or 3 millimeters from the end. Then crip
the 3 mm’s
down onto the filament. Then leave about 3 mm of space in between the to

wires. Then do the same with the filament raping on the other wire.
Here is somewhat of a
diagram:

! = wire !-!
- = filament ! !
! !
! !
Then
after you have made this you must make sure that the filament will not
brake and so that the
wire do not touch. You can fix that problem by simply
adding tape just below the filament so
that the wires are held firmly together.

-Vortex-

• Exploding lightbulbs
• LIGHT BULB BOMB
• Explosive Tutorial II
• Devious things to do to a car
• Under water igniters