IMPROVED CIGARETTE DELAY

IMPROVED CIGARETTE DELAY (By Atur {THE pyromaniac })

A variation on the standard cigarette display was invented by my good
friend Atur (THE
Pyromaniac). Rather than inserting the fuse into the SIDE
of the cigarette (and risk splitting
it) half of the filter is cut off, and a
small hole is punched THROUGH the remainder of the
filter and into the
tobacco.

(Ill. 4.31.1)

———————————
|FIL|Tobacco Tobacco Tobacco
fusefusefusefuse Tobacco
Tobacco side view
|TER|Tobacco Tobacco Tobacco
———————————

___
/ \
| o | filter end view
\___/ (artwork by The Author)

The fuse is inserted as far as possible into this hole, then taped or
glued in place, or the
cigarette can be cut and punched ahead of time and
lit normally, then attached to the fuse at
the scene.

A similar type of device can be make from powdered charcoal and a sheet /> of paper. Simply roll the sheet of paper into a thin tube, and fill it with
powdered
charcoal. Punch a hole in it at the desired location, and insert a
fuse. Both ends must be
glued closed, and one end of the delay must be doused
with lighter fluid before it is lit. Or,
a small charge of gunpowder mixed
with powdered charcoal could conceivably used for igniting
such a delay. A
chain of charcoal briquettes can be used as a delay by merely lining up a
few
bricks of charcoal so that they touch each other, end on end, and lighting the
first
brick. Incense, which can be purchased at almost any novelty or party
supply store, can also
be used as a fairly reliable delay. By wrapping the
fuse about the end of an incense stick,
delays of up to 1/2 an hour are
possible.

-= RFLAGG =-


• IMPROVED CIGARETTE DELAY
• Explosive Cigarettes
• Taste For Destruction
• HOW NOT TO GET KILLED
• ASSORTED EXPLOSIVES INFORMATION

IMPROVED CIGARETTE DELAY (By Atur {THE pyromaniac })

A variation on the standard cigarette display was invented by my good friend Atur (THE
Pyromaniac). Rather than inserting the
fuse into the SIDE of the cigarette (and risk splitting
it) half of the filter is cut off, and a small hole is punched THROUGH the
remainder of the
filter and into the tobacco.

(Ill. 4.31.1)

———————————

|FIL|Tobacco Tobacco Tobacco

fusefusefusefuse Tobacco Tobacco side view

|TER|Tobacco Tobacco Tobacco

———————————

___

/ \

| o | filter end
view

\___/ (artwork by The Author)

The fuse is inserted as far as
possible into this hole, then taped or glued in place, or the cigarette can be cut and punched
ahead
of time and lit normally, then attached to the fuse at the scene.

A
similar type of device can be make from powdered charcoal and a sheet of paper. Simply roll the
sheet of paper into a thin
tube, and fill it with powdered charcoal. Punch a hole in it at the
desired location, and insert a fuse. Both ends must be glued
closed, and one end of the delay
must be doused with lighter fluid before it is lit. Or, a small charge of gunpowder mixed with

powdered charcoal could conceivably used for igniting such a delay. A chain of charcoal briquettes
can be used as a delay by
merely lining up a few bricks of charcoal so that they touch each
other, end on end, and lighting the first brick. Incense, which
can be purchased at almost any
novelty or party supply store, can also be used as a fairly reliable delay. By wrapping the fuse /> about the end of an incense stick, delays of up to 1/2 an hour are possible.

Fer
the ‘94 CookBook. -= Exodus =-

• IMPROVED CIGARETTE DELAY
• Explosive Cigarettes
• Taste For Destruction
• HOW NOT TO GET KILLED
• ASSORTED EXPLOSIVES INFORMATION