ÕÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂø
³ Filename: TG177.TXT ³
ÆÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂõ
³ Title: Tear-Gas Pellets³
ÆÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂõ
³ By: Hell’s Angel ³
ÆÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂõ
³ Released: 06/14/96 ³
ÆÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂõ
³ Danger: ÛÛÛÛ°°°°°° ³
Ãâ€ÃƒÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂÃÂþ
This file will document the
procedure to produce small .177 caliber
cartridges that will fire a cloud of pepper defense
spray, for use by
individuals interested in carrying a form of defense, but object to
carrying
true firearms or weapons that are capable of serious injury.
All processes
described in this file are for informational purposes. If
the reader takes the responsability
to manufacture the products described
here, it is the readers own decision, and the author of
this file will take
no responsibility for any injuries or punishments levied on the reader
of
this file or anyone that is injured by any procedure or product described
within this
file.
>>>Intro<<<
^^^^^^^^^^^
Now that the disclaimer is
over with, we can get down to business. You
may ask why you’d want to make these Tear-Gas
Cartridges (TGCs). Well, if
you’re like me, you know you need some form of protection in
today’s world,
but you really don’t want to carry a real gun, or even a pellet gun, since
Well, now, if you have
a pellet gun, you can make harm-less TGCs for it,
and give yourself the protection you want,
and the piece of mind you need.
>>>Materials<<<
^^^^^^^^^^^^^^^
Ok. This is just a list of the things you’ll need to complete this
project. You’ll want to have all of these materials before you start.
Materials–
1) Extendable metal antenna similar to Radio Shack #270-1413
1) Can of pepper gas, or a
reasonable amount of homemade pepper irritant
1 or 2) Plastic sandwich bags
Equipment–
1) Pipe cutter
1) X-atco blade
1) Length of wire with a small
bend at the end
1) Pair of goggles
1) Respirator (optional, but recommended)
1)
Pair latex rubber gloves
>>>Prep<<<
^^^^^^^^^^
Ok. Now
you need to find which section of the antenna fits your gun. Just
cut off the little
cylindrical dealie at the end and try each section. When
you’ve found the section that fits
your gun, cut off all the other pieces
and get rid of them or somehting. Now, using the pipe
cutter, cut the section
that is the size of your gun (.177) into a bunch of smaller sections
that
are each the length of a pellet. You should have 8 or 10, and you’ll want
at
least 6 (2 for test firing, and 4 to use).
Also, take the sandwich bag(s) and cut it into
small (about 1 inch square)
pieces of plastic. This is vital. You must not cut the excesivly
large,
or insufficiently small. It may take some practice to find the right size.
That’s why you use water to test fire.
This should be the last step of the prep for making
the actual cartridges.
You should definately be OUTSIDE to do this part. Take some sort of
container that you know will not cause much splash.
I suggest using some sort of tall
beaker. Anyway, go outside with your
gloves, goggles and respirator on, and spray some of
your irritant into
the container. If you chose to use homemade irritant, you have an
advantage
here. Anyway, you only need a little. Maybe 2 or 3 CCs (eyeball it). Cover
this contianer immediatly, before going inside, and before removing your
protective gear.
>>>Procedure<<<
^^^^^^^^^^^^^^^
Ok. We’re now moving
to a step by step format, as I know I don’t give
complex instructions well. Here we go.
1. Take one of your little aluminum tube fragments and stand it on end
2. Take a
square of plastic wrap or bag, and using the rounded wire, press
it down into the canister.
You want a little pocket in the bottem, but
you also need to keep the edges of the plastic
above the top of the
canister.
3. With a method you will discover for yourself
(there are several good
methods. Find one that works), put a small amount of the TG into the
bubble or pocket of plastic in the bottom of the TGC. Just make sure it
doesn’t
completely overflow the sides of the plastic.
4. Take the little piece of wire, or
another piece, and use it to fold over
the sides of the plastic and tuck them into the TGC.
Like this horrid
ASCII diagram:
_/-|##|-\_ |\/|
|##| |##|
^ |##|
|##|
|
plastic before tucking ^— Plastic after tucking
(# means TG)
the rest. Be
sure to make one or two (or more) with WATER for a test firing.
>>>Test
Firing<<<
^^^^^^^^^^^^^^^^^
Make sure you KNOW for CERTAIN which TGC aren’t
really Tear gas, the ones
that are water (I know you READ THE WHOLE FILE BEFORE BEGINIG AND
KNEW TO
MARK THE WATER FILLED ONES, RIGHT?). Now, take those two (or however many)
and
take them outside or wherever, it doens’t matter. Put them in your gun
(be it CO2 or
pneumatic) and set up a target of paper or something. One other
idea to see how they work is
to use some of your mom’s perfume or some
deodorent or something instead of water. This will
help you see how well it
spreads. Anyway, pump the gun up, or whatever the case is, and fire.
You
should see a cloud of gas eject from the gun, as well as the plastic and
the
canister. Neither of the latter two objects will really hurt anyone.
Hopefully, the cloud of
gas WILL!!!! If you decided to use a fragrence of
one type or another, you should notice the
scent filling the area. It can
spread rather well.
>>>Conclusion<<<
^^^^^^^^^^^^^^^^
Be aware that these tear gas
cartridges are NEVER to be used as an
offensive weapon, or for attack in a mugging or such.
They should ONLY be
used for defensive purposes. If you decide to do otherwise, that is your
problem, and I SHALL NOT be held responsible.
Please report any glitches in
procedure or ideas for improvement to
Hell’s Angel
.:’ Call The Terrorists’
Homestead - (610) 279-1569 ‘:.
–hack
Add A Comment