The 'Official' Novelty ID thread [for ALL novelty questions]

[lovinit52]

on a different note. Using 10 mil artisyn and 7 mil gloss laminate, light shines through my id. Clarification: When i hold the card up to a light source, you can see the color on the other side. Is there any simple way to prevent this from happening? I imagine that means I need to change materials, however some have posted here that they use artisyn and 7 mil laminate to make california novelties.

Having light shine through the id seems to be a tell tale sign that it is a novelty. Should I try different materials to try to avoid this, or is there another option?

[jk0520]

Originally Posted by lovinit52

on a different note. Using 10 mil artisyn and 7 mil gloss laminate, light shines through my id. Clarification: When i hold the card up to a light source, you can see the color on the other side. Is there any simple way to prevent this from happening? I imagine that means I need to change materials, however some have posted here that they use artisyn and 7 mil laminate to make california novelties.

Having light shine through the id seems to be a tell tale sign that it is a novelty. Should I try different materials to try to avoid this, or is there another option?

It is like that one the real ones, if you hold it up to the right light.

[purplecheeser]

Originally Posted by jk0520

That's why I think he's a cop. Maybe, it is just Down syndrome? Either way, one in the same.

im a cop cause i didnt take advice?

[purplecheeser]

Ok, does anyone know if anyone scans the barcode on the back of CA?

And also say im in CA and i have a AZ license...will they scan that 2d barcode in CA to see if its legit? Im wondering if I should make the barcode or not.

[adambomb23]

Are there any legit sites on the web to obtain an id? All I see is people saying how they got scammed .

[melmoman]

I need scans of the back of the MA license.
Both versions under 21 and over.

I could also use a deep scan +600dpi of the registrars signature found on side of the photo.

Here is my Under 21 Full photoshop Layered



I need to Change the MA font on the circle seal but this will do for now till i search through all my fonts for a match.

Everything you see was created the images in the scan I had were not very good to work with and hence the signature is really just a bunch of blobs of black.

This isn't a patch job. its a full on re-creation had some trouble with the security lines but found that solution just need to work it a bit .

Got this coreldraw plugin called securidesign i just got to work it.


Here is the original i nicked off of Photobucket.



What can I trade? My list is really to long. Just ask it will be easier.
I have US Canada UK Singapore Russia Germany japan Iraq the list goes on.

I am not looking to vend anything here so please no PM's asking me to HOOK YOU UP.
Just want to trade some artwork with another artist is all.

[jk0520]

Originally Posted by melmoman

I need scans of the back of the MA license.
Both versions under 21 and over.

I could also use a deep scan +600dpi of the registrars signature found on side of the photo.

Here is my Under 21 Full photoshop Layered



I need to Change the MA font on the circle seal but this will do for now till i search through all my fonts for a match.

Everything you see was created the images in the scan I had were not very good to work with and hence the signature is really just a bunch of blobs of black.

This isn't a patch job. its a full on re-creation had some trouble with the security lines but found that solution just need to work it a bit .

Got this coreldraw plugin called securidesign i just got to work it.


Here is the original i nicked off of Photobucket.



What can I trade? My list is really to long. Just ask it will be easier.
I have US Canada UK Singapore Russia Germany japan Iraq the list goes on.

I am not looking to vend anything here so please no PM's asking me to HOOK YOU UP.
Just want to trade some artwork with another artist is all.

You do know that that the intricate lines are OVD ink? This ID is not like the CA ID with similar lines. Why are you trying to do such a hard license?
Let me list the reasons why this is ID is not for you.

State seal repeats in UV ink (not the easiest for UV)
Its got a security laminate (pretty sure TXP)
OVI overlapping photo and ghost image (could be the whole thing)
There are a few DOB placements than the obvious one
Really tiny microprint (smallest I've seen on an ID)

Judging by your PS skills you seriously lack some ability. Your seal fonts and security lines are way off. White is too strong. I could go on for a lot longer, but you know what it needs. It is also WAY WAY WAY to low a resolution, even if you did lower it to post it.

I am not trying to be an ass, but you need to start simple.

[melmoman]

Judging by your PS skills you seriously lack some ability

Put up or shut up.

I don't think I asked for any Critique on what i do. I was specific in what I asked for.

You make an assumption and have tailored your post to match that assumption.

I can see where a License like this might be Daunting to some but please there is nothing here that is a major challenge.

The guilloche patterns were somewhat troublesome but that has already been solved.

You do know what opacity is don't you?
Layer opacities are higher on these low rez images so that you can actually see the seal instead of just some blur.

State seals repeating in UV ink OMG I best stop right now. But then i guess again that assumption of yours fails you again.

This will be printed on A Jaguar 420i (customized eltron 420i)
Oooops you may have to re-think your comments.
But when you do so read the post first please.
I am well aware of the guilloche patterns not be anywhere near being suitable in the images displayed here. However had you read you would see that i had solved that problem already.

I thank you for your advice but it is not needed.
Yeah you have some practical knowledge but you really need to know what something like this would be printed on. As well as what type of ribbons will be used.

Everything you say is more than true if i were trying to do this with a laser printer.

[jk0520]

Originally Posted by melmoman

Put up or shut up.

I don't think I asked for any Critique on what i do. I was specific in what I asked for.

You make an assumption and have tailored your post to match that assumption.

I can see where a License like this might be Daunting to some but please there is nothing here that is a major challenge.

The guilloche patterns were somewhat troublesome but that has already been solved.

You do know what opacity is don't you?
Layer opacities are higher on these low rez images so that you can actually see the seal instead of just some blur.

State seals repeating in UV ink OMG I best stop right now. But then i guess again that assumption of yours fails you again.

This will be printed on A Jaguar 420i (customized eltron 420i)
Oooops you may have to re-think your comments.
But when you do so read the post first please.
I am well aware of the guilloche patterns not be anywhere near being suitable in the images displayed here. However had you read you would see that i had solved that problem already.

I thank you for your advice but it is not needed.
Yeah you have some practical knowledge but you really need to know what something like this would be printed on. As well as what type of ribbons will be used.

Everything you say is more than true if i were trying to do this with a laser printer.

Wow, you clearly fail on a few rudimentary and fundamental levels.

Judging by your work and comments, you have no clue what you are doing.

I was being kind to you before, but I will come out and say it now. YOUR TEMPLATE SUCKS. It is SO far off from the real thing, but you know this right because you have seen one? The layer bullshit is somewhat true, but your fonts are not close in the slightest degree (not just on the seal) But you know this. The colors on your are too light, the real ID is MUCH darker than both temps you showed . This is a full recreation, not a patch job? Are you being serious. This is a terrible patch job. I can tell you patched because the colors are so similar. For such a complex ID, you are using a SHIT template.

You don't go about making a template like this is PS, you use ILLUSTRATOR.

Your printer is not as good as a quality laser printer. You fucking dope.
You think you can do micro with a 300x300 printer? No. Modified Eltron? Uh, ok? It is still crap for doing this ID. You MIGHT be able to get away with GA or TN, but MA? It is a PLASTIC (PVC) ID printer. This is how I know you have no clue.

I would like to know how you plan on emulating TXP by using PVC. You will have to get the UV on the laminate, good luck doing that with this printer. If you try and get the UV on the card it is going to smudge like hell buddy. On top of that your patterns will need to be on the laminate because your shitty ass fucking printer won't print OVI ink. There are no easy ways to do OVI.

I bet you don't even know what color(s) the UV has on it. If you do PROVE IT.

But you say you have this figured out, so please tell us. You have done something that I have never seen done before. You "figured it out," but you wont tell us how. So you "put up or shut up."

Dude, you clearly have no visual reference for this ID. Why are you asking for the back of the ID? If you are such a Photoshop pro, make your own fucking back to it. But you can't because YOU ARE MAKING AN ID YOU HAVE NEVER SEEN OR TOUCHED.

Also, why do you capitalize letters in your posts that do not need it?

You are out of your league here in so many ways.

You should take advice when it is given to you.

[melmoman]

As to the fonts sorry i beg to differ your probably basing that on only looking at 1 character. I use the letter 'O" in place of a zero on all my templates so there is no doubt that it is one of mine if i see it again.
Looking at that single character one would think WTF. But as to the other Fonts I am sorry i would beg to differ. Post a scan or something to back up your claims insead of this armchair crap.

I do not use illustartor but once again if you actually read something instead of making assumptions. I use CorelDraw.

As for the Holo's not about to divulge that it is a well known technique for Id makers. And since you don't know tells me you just an armchair critic.
But truthfully on this i am not even going to aquire that ribbon. I am just going to fake it. Oh damn can be faked? Lol of course it can. perhaps you think that I am trying to achieve perfection with this template? Not Am only trying to achieve passable.

Perhaps i am in error doing this because this is an Under 21 and is not being handed over in some dingy bar. But really I am not about to spend a lot of time on something that is a one off>

You have obviously not ever used an eltron or the UV laminates that can be be bought over the counter. Once again the armchair critic.

As to it being in Photoshop I have been using PS since PS4 and am comfortable with it. For real imagery and text work i use Corel for image illustrator for text.

True i have never seen an under 21 before. But again with the assumptions. I could easily make a back for the license but it will not be accurate as i have not seen the back of an under 21.
And again your failure to read before spouting off. I was clear that the signature on the Under 21 scan i have did not match the Over 21. The over 21 I do have an actual physical copy..

All security features and colors are exactly the same on both licenses only the layout differs.

Perhaps you would do the simple courtesy of actually reading what is said before commenting.

i afford that courtesy to your posts.

Sorry to harp on your not reading thoroughly. But two more occasions of it.

1) A re-creation. You think a recreation is a duplicate? LMAO! Not! What everyone in this business strives for is a re-creation that will appear to be the real thing. If I wanted to make exact copies i would get myself a job with the dmv. A re-creation is allows me to keep my ass out of jail.

2) I think i was also clear that I was not going to be spending a lot of time on this as who the hell wants an Under 21 anyway.

I said it once before put up or shut up.
Lets see some of your work???
Oh you don't have any. Of course you don't you can only speak from the armchair.

[jk0520]

Let me lay this out for you one more time.

I am looking at both an O21 and U21 new style MA ID right now. Your templates are not close to what a real one looks like at all, not the colors, not the text. The layout isn't really even that close.

" As to the fonts sorry i beg to differ your probably basing that on only looking at 1 character. I use the letter 'O" in place of a zero on all my templates so there is no doubt that it is one of mine if i see it again.
Looking at that single character one would think WTF. But as to the other Fonts I am sorry i would beg to differ. Post a scan or something to back up your claims insead of this armchair crap."

No one is going to use your shitty temp, don't flatter yourself. I am not going to hold your hand and show you a scan of what it should look like, mainly because I think you are an idiot. Doubt me all you want, whatever cowboy. Your fonts are way off, believe it or don't.

"I do not use illustartor but once again if you actually read something instead of making assumptions. I use CorelDraw."

If you don't use Illustrator (learn to spell or at the least use spell check), then you should consider it. I prefer Illustrator and PS to CorelDraw, but this is preference.

"As for the Holo's not about to divulge that it is a well known technique for Id makers. And since you don't know tells me you just an armchair critic.But truthfully on this i am not even going to aquire that ribbon. I am just going to fake it. Oh damn can be faked? Lol of course it can. perhaps you think that I am trying to achieve perfection with this template? Not Am only trying to achieve passable."

Again, this IS NOT A HOLOGRAM. This is OPTICAL VARIABLE INK (OVI) Doing basic hologram techniques will not replicate this in any way. Of course you can try and fake it using Pearlex, it will look like shit and not pass the grandma behind the counter. This is not a basic hologram, it is much more advanced than you believe. I know you do not know what you are doing, admit it. You will not even get a passable ID by doing this, unless maybe you live in Bumfuckville, USA where everyone is inbred and shooting mosquitoes off their front porch with a shotgun. Which is entirely possible given your posts.

What do you mean you are not going to divulge a well known technique? Do you know what divulge means? Dictionary.com : " v. to disclose or reveal (something private, secret, or previously unknown). " If it is well known, you can't divulge it. And there is no well known technique for OVDs.

"Perhaps i am in error doing this because this is an Under 21 and is not being handed over in some dingy bar. But really I am not about to spend a lot of time on something that is a one off"

What? You do realize that just because an ID says U21 that it does not always mean the holder is U21? If you don't care then why are you asking for an "artist" to share a back with you. I know you didn't spend a lot of time, it shows. One off? What are you taking about? Your ID is like 100 off from being even a hair close.

"You have obviously not ever used an eltron or the UV laminates that can be be bought over the counter. Once again the armchair critic."

No, I have never used an Eltron because I don't do PVC cards. Over the counter UV laminates? Dude, you need to read some basic stuff on making IDs before you try and sound like you know what you are doing. Do everyone a favor and sit in your "armchair" and read a little. If a laminate says UV on it, guess what, it means that it DOES NOT LET UV LIGHT PASS THROUGH. So no UV will show up at ALL. I am not even sure if that is what you are talking about though. You seem to think that you can buy laminates with the MA seal in UV on it? This is such a dumb proposition that no more needs to be said here.

Also, Eltron is not what you want for this. You want a LASER printer for MA. MA uses something similar to TXP and a thicker substrate than standard teslin. You will not get a passable ID by using a PVC printer

You never told me what colors you thought the UV was on the license either. Are you lying when you say you have one? Sounds like it.


"As to it being in Photoshop I have been using PS since PS4 and am comfortable with it. For real imagery and text work i use Corel for image illustrator for text."

A monkey could have used Photoshop since PS4, do you think he will be any good at it? Clearly, you are not.

"True i have never seen an under 21 before. But again with the assumptions. I could easily make a back for the license but it will not be accurate as i have not seen the back of an under 21.
And again your failure to read before spouting off. I was clear that the signature on the Under 21 scan i have did not match the Over 21. The over 21 I do have an actual physical copy.."

No shit you have never seen one. I will point you in the right direction. Why don't you use the O21 back on it, then when you find a U21 you can correct it if you need to. (I am dropping you a BIG HINT here) Where the fuck did I mention anything about a signature? It is you who is failing to read before spouting. You know nothing of making these things and it shows.


"All security features and colors are exactly the same on both licenses only the layout differs.

Perhaps you would do the simple courtesy of actually reading what is said before commenting.

i afford that courtesy to your posts."

Are you sure that they are the same? Because you don't have a U21 to compare with your O21. I did read what you said, that's how I know you are lost. And good, I am glad you read my posts thoroughly, you might learn something.


"Sorry to harp on your not reading thoroughly. But two more occasions of it.

1) A re-creation. You think a recreation is a duplicate? LMAO! Not! What everyone in this business strives for is a re-creation that will appear to be the real thing. If I wanted to make exact copies i would get myself a job with the dmv. A re-creation is allows me to keep my ass out of jail.

2) I think i was also clear that I was not going to be spending a lot of time on this as who the hell wants an Under 21 anyway."

OK, you are not in this business, don't front. We want a recreation of the real thing, not of a bullshit photo you got off of google. Making recreations will not keep your ass out of jail, sorry. More proof you have no idea what you are doing. "But Mr. FBI, I was only making recreations!"

Let me know how that worked when you get out of prison.

Who wants an U21? If you have read this far then you read the part where I said just because your ID says U21, does not me you are U21. I may have just blown your mind. In fact, if I were to buy a fake ID, I would want my ID to say U21, it is more believable.

"I said it once before put up or shut up.
Lets see some of your work???
Oh you don't have any. Of course you don't you can only speak from the armchair. "

Listen to me and admit that you are way out of your league, that you don't know what you are doing, that you are an idiot. Then I will consider showing you some of my work, privately. It won't be posted on this website though, sorry.

[purplecheeser]

Originally Posted by adambomb23

Are there any legit sites on the web to obtain an id? All I see is people saying how they got scammed .

totally. not

[purplecheeser]

question on the thermal transfer method: Im using a PL4A lamintor on the lowest temp setting. Do you guys use a carrier with your transparency and laminate? Like a thick peice of paper that folded over it? Because im getting crappy transfered from trans to lam.

Or am I just waisting my time and should invest in an alps?

[obertojerky]

instead of an actual hologram, i just cu tone out of a visa gift card, shaved off the back, and glued it in place and made it even. very convincing =P

[jk0520]

Originally Posted by purplecheeser

question on the thermal transfer method: Im using a PL4A lamintor on the lowest temp setting. Do you guys use a carrier with your transparency and laminate? Like a thick peice of paper that folded over it? Because im getting crappy transfered from trans to lam.

Or am I just waisting my time and should invest in an alps?

Use a carrier, you can mess your laminator up by not using one.

The easiest way is to take a 8 1/2 by 11 piece of teslin and cut it to the size you want and then fold it. Then take a standard 5 mil lam sheet and cut it to the size of the teslin you just cut. Laminate the 5 mil lam to each side of the teslin. You nowshould have a hamburger like piece of teslin with the inside (where the meat is) having 5 mil lams on each side.

Best and easiest carrier.

You do not need to use the lowest temp with your holos, try upping it a bit and see how that goes. Adjust accordingly.

[stumpy]

Would someone please tell me the font used on the California license in the name and address area. Carbon Bold is very similar but not quite the same. I would love to use that font to give the effect I am looking for on a personal project.

[jk0520]

Originally Posted by stumpy

Would someone please tell me the font used on the California license in the name and address area. Carbon Bold is very similar but not quite the same. I would love to use that font to give the effect I am looking for on a personal project.

RapidShare: Easy Filehosting

Hope this helps with your project.

[stumpy]

Thank you. In return, please PM me if I can be helpful with any CA scans.

[melmoman]

i read your post with interest and you are just so wrong on so many points that there is no need to further discuss it.

I don't blame you however it is not really your fault you are an intelligent and educated person but that there is you down fall.

I don't mean this in a mean spirited way. your thinking is totally linear and this is what is happening in all academic institutions. You can't step off that line and be creative.

I don't enter into something with theses pre-conceived notions that something can't be done. I go at it knowing that it can.

Truthfully pal your wrong and have all ready conceited that point by entering into insults . We were having a nice open discussion on a topic I enjoy until you decide to bolster your argument with insults.

I could refute everyone of your arguments with ease but what would be the point you would only then try and find flaw in that. your linear thinking getting the best of you again.

One thing we both agree on however is that this is no place to be posting most of the techniques we are talking about. Nor do i think it is wise to even discuss them fully either.

As I have repeatedly said i am not interested in selling anything here. I use the term "Artist" simply for the legal connotation of the word in the context of this thread.

Good i am happy I can't make squat. lets leave it at that. I desire no kudos. I desire a scan of a the back of a license is all.

Anyhow all the best to you.

[purplecheeser]

sounds good, ill try that.

I think im going to experiment around with some tenslin as opposed to artisyn see which one works best. jk32523 which one do you prefer?

Also does anyone know if brainstormid has gone on vacation or something? THe say they arn't going to be taking orders for the next 2 weeks. Perf doesnt have ne more lam with mags

[jk0520]

Originally Posted by purplecheeser

sounds good, ill try that.

I think im going to experiment around with some tenslin as opposed to artisyn see which one works best. jk0520 which one do you prefer?

Also does anyone know if brainstormid has gone on vacation or something? THe say they arn't going to be taking orders for the next 2 weeks. Perf doesnt have ne more lam with mags

Depends what ID you are doing, they have their ups and downs. In general though I liked artisyn.

I wouldn't buy from brainstorm, crappy quality and high prices. Search elsewhere.

Don't know much about this perf dude.

[jk0520]

Originally Posted by melmoman

i read your post with interest and you are just so wrong on so many points that there is no need to further discuss it.

I don't blame you however it is not really your fault you are an intelligent and educated person but that there is you down fall.

I don't mean this in a mean spirited way. your thinking is totally linear and this is what is happening in all academic institutions. You can't step off that line and be creative.

I don't enter into something with theses pre-conceived notions that something can't be done. I go at it knowing that it can.

Truthfully pal your wrong and have all ready conceited that point by entering into insults . We were having a nice open discussion on a topic I enjoy until you decide to bolster your argument with insults.

I could refute everyone of your arguments with ease but what would be the point you would only then try and find flaw in that. your linear thinking getting the best of you again.

One thing we both agree on however is that this is no place to be posting most of the techniques we are talking about. Nor do i think it is wise to even discuss them fully either.

As I have repeatedly said i am not interested in selling anything here. I use the term "Artist" simply for the legal connotation of the word in the context of this thread.

Good i am happy I can't make squat. lets leave it at that. I desire no kudos. I desire a scan of a the back of a license is all.

Anyhow all the best to you.

I will share my techniques with anyone who wants to listen. I don't share my templates, they are mine to keep.

You cannot do a convincing job of OVI with a dye sub printer, period. You can buy OVI from places in China, I don't know of the quality.

I insult you because you don't listen. You are to naive to realize that it can't be done well without doing it right. I know because I and many others have tried many many times to get an OVD to work convincingly.

Anyway, to answer your question, the backs are the same on the U21 and O21.

Concede

You can't refute shit. Shut up.

[melmoman]

Well thank you for that information. That wasn't to hard was it.
I am not going to argue with you.

About Jail and recreations. There we go making assumptions again.
I do not live in the US. laws where i live are different for the time being all though that is soon going to change when they get a new bill passed.

Lmao over your speaking for everyone "we don't want what you offer?"
Never mind the sheer arrogance at granting yourself the right to speak for everyone.

I HAVE NOT OFFERED TO SELL ANYTHING.

Anyone following this debate that is interested in knowing the truth about this thread. Never mind the other poster read the document and make up your own mind.

Secure_ID_Card_Printing_IDW.pdf

Every single issue he has raised and said can't be done is addressed in this document.

You just don't know when to leave well enough alone.
i was quite willing to go along my merry way and leave you with your illusions of the resident expert. but you just have to push.

So refute i do.

Omg isn't my printer listed there. Hmmmmmm?? LMAO

[jk0520]

Originally Posted by melmoman

Well thank you for that information. That wasn't to hard was it.
I am not going to argue with you.

Seriously check out the 420i the 520i the 620i all made by Eltron
Especially in relation to OVI Microprinting and UV ribbons. (no not the overlay uv protectant you described earlier) Don't think you know the answer research it you'll be a bit surprised.

Find this document and i refer you to page 5 in it.
Secure_ID_Card_Printing_IDW.pdf



As I have said I have found another cheaper way of faking this.
If your interested in discussing this then PM me. i would be interested in knowing some of the paths you have taken and i will tell you which ones i have taken. Including printing multiple overlays each with there own different colors. Kind of like a big sandwich. Total disaster but fun and educational.

Can you write the BIOS for the printer?

I have always been under the impression that the company (Zebra, Fargo, Magicard, etc.) codes and sells the custom OVI and custom UV into the printer itself for the user? Obviously, this is to to keep fucks like you and me from making these. There are no known alternatives to this.

None the less, like I have said many times, this is for PVC applications which are not applicable for MA and quite a number of other states. If you can figure out how to get this stuff on to just the laminate or can you modify the printer to accept thin substrates? This is all assuming you modified the BIOS though...

[lovinit52]

I was planning on ordering from brainstorm id because they carry full sheet 7 mil laminate with and without the mag strip.

If I were to cut out the id using a die cutter wouldn't I need full sheet laminate? When looking at the California id it is clear that is die cut because the back edge rounds into the front edge (as though it was pressed down as it was cut). Simply laminating using a butterfly pouch wouldn't give this look right?

[purplecheeser]

Originally Posted by lovinit52

I was planning on ordering from brainstorm id because they carry full sheet 7 mil laminate with and without the mag strip.

If I were to cut out the id using a die cutter wouldn't I need full sheet laminate? When looking at the California id it is clear that is die cut because the back edge rounds into the front edge (as though it was pressed down as it was cut). Simply laminating using a butterfly pouch wouldn't give this look right?

Yea CA is die cut. And brainstorm ID doesnt have full sheets of 7mil gloss right now. They said in 2 weeks they will

Im ordering transkote KTRY, 6mil satin, soft crystal and gloss to see which one turns out more realistic

[RoddiyKnox]

Does anybody have a good FREE template website? i used to have a college one, but i dont even nearly look like im college bound, so i was wondering...

[RoddiyKnox]

Hey guys, first of all ill start by saying ive read this forum alot, for a very long time

was never able to register, always had problems... but today i got lucky xD

ok well im just 17 now, and im starting to grow a beard, i was wondering if theres anything to help me grow it faster?

so i could look old enough for a fake id?

idk like a drink or chemical that has been proven to help...

thx alot

[bigj]

-rogaine?
-shave more often so it grows in faster and thicker
-just google it tons of commercial products out there for hair growth
-all else fails pubic hair glued on your face haha jk

[purplecheeser]

Ok that carrier suggetion was golden and found a technique that is flawless. after dumping pearl-ex on the lam i just sprayed the whole thing with compressed air, directly afterwards. I never did this beccause i thought it would alter the fine details, but it didnt. I would run it once with one laminate to get all the excess pearl ex off the trans (plus their aways too much on the lam) and the after running it the second time with the lam you want to use and it comes out beautiful!

What i did before was getting a q-tip and removing the excess around the edges, but that just led to clumping and looked shitty.

Im excited, I just need to take care of the printing issue and order te UVcarts and ill be rollin