The 'Official' Novelty ID thread [for ALL novelty questions] - Page 52

caliid2006 · #**1531** (**permalink**) 08-27-2008, 10:23 AM

Perf is back??

purplecheeser · #**1532** (**permalink**) 08-27-2008, 04:18 PM

Quote:

Originally Posted by caliid2006

Perf is back??

Not his website, I just occasional business through his email. Do you know if his UV ink carts are legit?

caliid2006 · #**1533** (**permalink**) 08-28-2008, 02:48 AM

Fuck yeah they are legit, they are the best ones you can get.

purplecheeser · #**1534** (**permalink**) 08-28-2008, 04:29 AM

Quote:

Originally Posted by caliid2006

Fuck yeah they are legit, they are the best ones you can get.

hmm I don't know if that sarcastic, but I hope its not because i ordered a few reds and greens to test.

This must be who you bought from before going out of business.

caliid2006 · #**1535** (**permalink**) 08-28-2008, 04:05 PM

Not sarcastic, they a really are good.

I didn't use these on my current work because my needs were more specialized and had to have my own made, but Perf's are good.

purplecheeser · #**1536** (**permalink**) 08-28-2008, 05:32 PM

Quote:

Originally Posted by caliid2006

Not sarcastic, they a really are good.

I didn't use these on my current work because my needs were more specialized and had to have my own made, but Perf's are good.

Ok i placed that order with perf for the UV, came out to like 120 with a UV flashlight.

So Caliid, do those carriers that you get from kinkos, do they give the TXP a glossy finish? Because ive been using carriers from Brainstorm ID and it gives the surface a matte finish. ITs annoying

dm605 · #**1537** (**permalink**) 08-29-2008, 05:28 AM

great post you guys got going on here, very helpful.

i was just wondering if anyone else is having printing problems with the perforated teslin. the perforations are causing the printer to smear the ink while printing. does anyone else have this problem?

getdowngetdirty · #**1538** (**permalink**) 08-29-2008, 07:57 AM

Quote:

Originally Posted by dm605

great post you guys got going on here, very helpful.

i was just wondering if anyone else is having printing problems with the perforated teslin. the perforations are causing the printer to smear the ink while printing. does anyone else have this problem?

I dont think your putting the teslin in the printer right. Make sure the perforated arrows are facing in the direction your printer is taking in the printer, and that the other arrow is facing to the left. And i dont think the perforations would make it smear, i think that your printer just cant handle teslin or something since perforated teslin has the cards "bubbling out" If I were you I'd use full sheets so you don't have that problem to begin with. Also, try changing your printer settings before you print, like instead of standard paper try photo gloss option or something.

mkone · #**1539** (**permalink**) 08-29-2008, 09:01 AM

going to Westernunion 50.00 dollars for anyone with IL template. The catch, I need it within the next two days

Cockalordy · #**1540** (**permalink**) 08-30-2008, 06:13 AM

I am trying to make a good tennessee nov. any tips for how i could make the hologram for the front? its a state seal of tennessee

purplecheeser · #**1541** (**permalink**) 08-31-2008, 02:43 AM

Does anyone know what kind of power cord an alps md5000 takes? They're hard to find

gunitwhoop · #**1542** (**permalink**) 09-02-2008, 08:15 AM

check out clearneon.com looks kinda dope huh/,?

getdowngetdirty · #**1543** (**permalink**) 09-02-2008, 08:31 AM

anyone figure out how to get the msr206 to work with usb? the software that comes with it only recognizes com ports, and i got usb... thanks in advance for any help

pyrar · #**1544** (**permalink**) 09-02-2008, 11:52 PM

Quote:

Originally Posted by getdowngetdirty

anyone figure out how to get the msr206 to work with usb? the software that comes with it only recognizes com ports, and i got usb... thanks in advance for any help

What you need to do is figure out what COM port your USB is exposed on. You can go through device manager to figure this out, or just do what i did, and try every com port till the application can initialize the device.

Also, I don't mean to cross post, but I suppose this may be more relevant in this thread:

Quote:

I've created a web application that creates Track 1,2,3 magnetic stripe data for DL's.

For more information, go here: http://chrismoos.com/2008/08/29/aamv...ipe-generator/

getdowngetdirty · #**1545** (**permalink**) 09-03-2008, 12:13 AM

Awesome, appreciate that post I'm sure that program will come in handy for many. Yeah I guess that's not the problem then in my case, since it's tried all and it's still not working

Under device manager it's shown as com3 with an exclamation point next to it, and under details it says "windows cannot determine the settings for this device...use the resource tab to manually set the configuration." I'm guessing the drivers that came with it are the problem or i have to change the configuration under the resources tab. If anyone can post up what the settings they got under their resources tab for the msr206 looks like I would appreciate it greatly. It's located at Device Manager > Ports > MSR206 Properties > Resources.

AmerOffLine · #**1546** (**permalink**) 09-03-2008, 01:37 AM

I see alot of people dancing around this question, but I've never seen someone actually answer it. I'm looking for a fake ID - Do I make it, or find someone who makes them? I have fairly decent resources, just not alot of time. I'd be willing to invest the time and money, if I actually had a chance of making a sufficent ID. It seems to me alot of the equipment I would have to buy for solid results, would be better suited for someone who is mass-producing, given the monetary investment.

So is it worth it to buy the equipment and make my own? Or hunt down someone who can do it for me? Or learn karate, and simply beat the fuck out of any bouncer who looks sideways at me? I know I only have 6 or so months to wait....but where's the fun in that? I see people on this website who produce fake-IDs apparently on quite a massive scale....... but where the hell are those guys around where I live? I figured I'd find you guys amongst the swine, but I know the swine forwards and backwards now and all I've accomplished is getting cheap chronic on demand, and knowing where to buy anything from liquid human Adrenaline, to quality Chinese opium. I want beer. Not opium. Fuck.

getdowngetdirty · #**1547** (**permalink**) 09-03-2008, 03:20 AM

Buy one. If all you want to do is buy beer, you can make yourself one at the price of buying one. If you want to get into the clubs, then the amount of money it takes to make one increases greatly. Oh, and if you can get liquid human adrenaline, you are far beyond getting an ID. I'm sure somebody will trade you, just not on this forum.

AmerOffLine · #**1548** (**permalink**) 09-03-2008, 08:42 AM

I decided to make one - the challenge sounds too much fun not to try.

I'm going to work with both a Teslin and a Dynasn method I found....

I've got a rubber stamp design I've made for the hologram, and luckily my place of employment has an encoder I'm fairly certain I'll be able to use. I'm using 10mil Tes and 10mil butterfly pouch for a solid 30.

The only problem I'm have is finding a viable template. My photoshop skills aren't exactly lacking but I'm having the hardest time understanding how I can scan a license, change the information, slap in a new picture, and have it still be credible. Anyone got any pointers, at least a start? The guides online seem to be very thorough in detail in regards to everything but templates. They're telling me, "Make sure the template is well done," and "The template is extremely important,"............ Helpful.

richierichtx · #**1549** (**permalink**) 09-03-2008, 09:03 AM

Quote:

Originally Posted by getdowngetdirty

Buy one. If all you want to do is buy beer, you can make yourself one at the price of buying one. If you want to get into the clubs, then the amount of money it takes to make one increases greatly. Oh, and if you can get liquid human adrenaline, you are far beyond getting an ID. I'm sure somebody will trade you, just not on this forum.

yeah if you can get epinephrine you should have no problem getting a fake id. I didn't even know there was a interest in epinephrine on the streets, although it wouldn't be that hard to get if someone wanted it. Anyways you could try just asking around, people have told me about places to get a fake id before, they run like $500 for a quality id. I would say you could make one for that price if you only made a couple mistakes, but not much room for error.

theguru1575 · #**1550** (**permalink**) 09-03-2008, 03:19 PM

so ive been working on templates for texas, and south carolina for the past month. Kinda learning with photoshop as I go. unfortunately my months trial just ended. Anybody have a serial number to photoshop elements, or know where I can find one. Kind of hesistant to download one off of piratebay or something like that. also I have an extremely random question, but what is the difference between hico and loco butterfly packets. didnt want to order the wrong thing. and thanks to all you guys, this forum has been a wealth of knowledge in getting me started.

getdowngetdirty · #**1551** (**permalink**) 09-03-2008, 05:30 PM

Quote:

Originally Posted by theguru1575

so ive been working on templates for texas, and south carolina for the past month. Kinda learning with photoshop as I go. unfortunately my months trial just ended. Anybody have a serial number to photoshop elements, or know where I can find one. Kind of hesistant to download one off of piratebay or something like that. also I have an extremely random question, but what is the difference between hico and loco butterfly packets. didnt want to order the wrong thing. and thanks to all you guys, this forum has been a wealth of knowledge in getting me started.

Hi-co means high coercivity and lo-co means low coercivity magstripes. coercivity is the density of the magnetic particles of the stripe. I don't know which one texas is, but I'll bet it's on this forum somewhere

AmerOffLine · #**1552** (**permalink**) 09-03-2008, 05:35 PM

Someone talk some sense into me...

I use a buddy's Birth certificate and social security card. I make a fake college Id with my picture on it.

The DMV Laws in Ohio for replacement licenses are very lax. I go into the registar's office, request a new ID, they process the paperwork, snap my photo, and print me one out.

Okay, so I feel like this is really, really epic-ly dumb. But I can't help but think I'll get away with it......

Gruber · #**1553** (**permalink**) 09-03-2008, 06:13 PM

anyone have a current NV template to share?

Kmaster · #**1554** (**permalink**) 09-03-2008, 10:24 PM

rapid refill ink is the place that can do all your shit. just buy the quality uv inks somewhere else.

purplecheeser · #**1555** (**permalink**) 09-04-2008, 01:04 AM

Quote:

Originally Posted by Kmaster

rapid refill ink is the place that can do all your shit. just buy the quality uv inks somewhere else.

Ill keep it in mind. Im going to test out perf's uv carts first.

richierichtx · #**1556** (**permalink**) 09-04-2008, 01:49 AM

Quote:

Originally Posted by AmerOffLine

Someone talk some sense into me...

I use a buddy's Birth certificate and social security card. I make a fake college Id with my picture on it.

The DMV Laws in Ohio for replacement licenses are very lax. I go into the registar's office, request a new ID, they process the paperwork, snap my photo, and print me one out.

Okay, so I feel like this is really, really epic-ly dumb. But I can't help but think I'll get away with it......

I have thought of the same thing, texas is also not very suspicious about getting a replacement id, but don't they have a picture of you still on file and would notice you're not that person?, like when they go, do they pull up you're file, and just take a new picture, or do they just treat it like a new license, but now that I think about it they have to pull up your file because they have to verify that you actually have a valid license.

Also, why can you not just make a fake birth certificate and ss card, I have never seen them verify any of my documents before, the only one I would think they might verify is the ssn, the computer might check that when they enter it.

Sain · #**1557** (**permalink**) 09-04-2008, 02:51 AM

Does anyone have any experience with theses? Or is the MSR 206 really worth the extra $150?

3 Tracks Magnetic Credit Card Encoder Reader Writer - eBay (item 120301229041 end time Sep-09-08 14:11:18 PDT)

pyrar · #**1558** (**permalink**) 09-08-2008, 07:08 AM

Quote:

Originally Posted by Sain

Does anyone have any experience with theses? Or is the MSR 206 really worth the extra $150?

3 Tracks Magnetic Credit Card Encoder Reader Writer - eBay (item 120301229041 end time Sep-09-08 14:11:18 PDT)

I would go with the MSR 206. In the details for that auction it specifies it doesn't write hi-co, only lo-co, which is pretty useless.

I have the msr206 and it's a great reader/writer, albeit a bit expensive.

snowparty · #**1559** (**permalink**) 09-08-2008, 09:32 PM

I'm thinking about making some basic FL fake ids for buying some beer.

I have a few questions though

do i really need to get involved with any holo shit?

anyone have a florida template i can use?

can i just use teslin and a laminator/laminates to make the id? is there anything else i need?

i have a laser printer, is this ok? can the ids i make be easily traced back to me?

anyone know of a good detailed guide maybe with pictures, im having trouble finding anything up to date.

thanks for the help and sorry about the noob questions

getdowngetdirty · #**1560** (**permalink**) 09-08-2008, 09:48 PM

Quote:

Originally Posted by snowparty

I'm thinking about making some basic FL fake ids for buying some beer.

I have a few questions though

do i really need to get involved with any holo shit?

anyone have a florida template i can use?

can i just use teslin and a laminator/laminates to make the id? is there anything else i need?

i have a laser printer, is this ok? can the ids i make be easily traced back to me?

anyone know of a good detailed guide maybe with pictures, im having trouble finding anything up to date.

thanks for the help and sorry about the noob questions

duuudee just read the thread you wouldnt have questions if you did so.

but since me saying that won't change the fact that you posted that post...

a laser printer will be fine, but all laser printers print a microscopic code with your printers serial number so yes, it "can" be traced to you. Inkjets on the other hand, don't. If all you want to do is go to a liquor store and buy beer, it doesn't exactly have to be that good, but you probably still want holos. other than that, teslin and a laminator will do.