-- Posted by ladieluver on 10:43 pm on Nov. 24, 2001 Hey, does anyone know how to open those electronic locks, you know the ones with like the touch keys and shit, does anyone know how to break the codes or like get the code or just open the fuckin thing? There is one at this warehouse and i nee to get inside it, help me out some one -- Posted by Sicopath on 5:12 pm on Dec. 5, 2001 I think if you  drill holes in 2 different places (I don't know) and connect with wire it will short-circut the board and reset the code? I dunno. Can somebody confirm this? -- Posted by somefukinsnapov on 1:08 am on Dec. 6, 2001 i just spoke to a mate who told me that if u pull the face(keypad) plate off ,theres a few wires touch them all together, and u should hear a buzz and thats the lok  unlocking..if it dont unlock then there may be a funky trip thing that shortcircuits and then u just cant get in..but u were on the right track there sicopath ..it just doesnt short out unless theres this (kinda like a surge protector!!)  hope it helps  bud just next u gotta figure out the alarm system?? -- Posted by balor on 2:37 pm on Dec. 8, 2001 I saw in some spy or lockpicking manual a mention of a handheld unit that opens a electronic lock remotely.Dont know any more though.Would probably be very expensive and only worth it if you were going to use it regularly. (Edited by balor at 2:39 pm on Dec. 8, 2001) -- Posted by ladieluver on 7:30 pm on Dec. 8, 2001 Thnx for the help ppl, i need to get into this warehouse where they keep all the alcohol and cigeretts at this country club, i'll try the method you gave me and see if it works -- Posted by kent82 on 10:25 pm on Dec. 8, 2001 Umm... i think that if you try to remove the face plate of some sorts of electronic locks it sets them off or something... i know that if you push # and * at the same time it can set them off because its like a panic button or something...uhh you could try dusting it for finger prints and try to go for the combination from there? where you're going to get that dust shit from though i don't know. maybe talcum powder or something would work. kent82 -- Posted by saurontheevil on 10:37 pm on Dec. 8, 2001 just use baby powder -- Posted by somefukinsnapov on 8:37 pm on Dec. 9, 2001 [quote]Quote: from kent82 on 8:25 am on Dec. 9, 2001 Umm... i think that if you try to remove the face plate of some sorts of electronic locks it sets them off or something...   yeah thats kinda right it won't set any alarms off it will just short the fuse to the lok and its all over..and if it doesn't then its as easy as pinching all the wires together at the back of the terminal... u either get in or u dont (u should hear the lock bar  slide if u go it right -- Posted by Lowman on 2:46 am on Dec. 10, 2001 on most systems there tamper screws u unscrew the alarm goes off thats only if its hooked up to an alarm system that is some are locks -- Posted by Sicopath on 5:31 am on Dec. 10, 2001 hey everyone, think about this. To every complicated problem, there is likely to be a simple answer. Some of my friends don't have the kind of patience to do complicated shit and say "oh fuck this" and tear out a crowbar. The moral of the story: Find alternatives. -- Posted by ladieluver on 6:27 pm on Dec. 10, 2001 HAHA LOL yeah i might of tried that last night but i tried the method of taking the face plate off a diffrent one just to test it and it worked so i wanted to say thanx for the help ppl -- Posted by somefukinsnapov on 12:34 am on Dec. 13, 2001 kik ass bud hope ya get into that country club...lol         rok on..... jAk -- Posted by The Great Milenko on 2:52 am on Dec. 13, 2001 Well first of all most of them are alarmed so if you phuck with them (like busting it open with force, not just finding out the combo) it will trigger a silent alarm at some pigger H.Q so another way would be to (depending on the type of the door) just get an angle grinder and cut a hole in the door big enough for either your hand or you, otherwise shine a purple light (the kind that makes white clothes glow in the dark) on the key pad to see the fingerprints -- Posted by The Great Milenko on 2:57 am on Dec. 13, 2001 oh also the door is only the first bit, you also hafta worry about shit like motion detectors and cameras so wear a ski mask or somthing similar to hide your identity and of course wear some gloves and if your just gonna go gung ho into the mulfucker i suggest making it quick and also i'd suggest that if your gonna go to the trouble of getting in there i suggest going for more than just the alchohol and cigs, but of course thats just my opinion so if you think that cigs and alchohol mean more than anything else then go for it, sorry if i've stated the blindingly obvious in this post but owell i just thought you may need to know :) -- Posted by ladieluver on 9:15 pm on Dec. 13, 2001 I GOT IN JUST FINE AND GOT ABOUT 100 CASES OF SMIRNOFF ICE!!!! AND 5O CARTONS OF CIGS SO I'M HAPPY THANX FOR THE HELP! -- Posted by Dman on 9:56 pm on Dec. 14, 2001 why didn't you just go thru the window yo? -- Posted by ladieluver on 2:36 am on Dec. 15, 2001 No window..... just a steel door...... -- Posted by Dman on 11:29 am on Jan. 4, 2002 that sux...can you take the hinges out of the door? -- Posted by Sen dog on 5:14 pm on Jan. 28, 2002 People alarm windows and doors but not the walls if you could get the bricks out like in alcatraz you might get in that way -- Posted by MadBomber2 on 5:32 pm on April 4, 2002 u could blast through the lock if the area is desolate like in the middle of their golf course. Also a simple co2 bomb should do the trick.  Also what wires do u connect and stuff? -- Posted by davetheduck on 12:40 pm on April 5, 2002 here is your awnser, if there is a place u can hide hide near it, use a camcorder or at the very least a pair of binoculars, lay facing the lock with a clear line of view and whach a few people punch in the code it's a simple code usually 4 digits so after some time u will pick up the numbers they r using.  Now remember it,s not worth taking a face off the key pad, it's very difficult to do and an obvious sign of a break in, if u manage to get the code and use it steal small ammounts so the owners will think that the employees are stealing it, and remember if u r planning to go in after every one else has gone home no doubt that they have motion detectors inside the area so you would be fucked unless u go in during the daytime , the choice is yours -- Posted by qube on 4:49 pm on April 5, 2002 d00d......ladieluver has done what he wanted to do already, jeez this topic is older than me on this site.....LOL! -- Posted by MadBomber2 on 8:10 pm on April 5, 2002 well what happens if there aint any place to hide and just flat plains? -- Posted by MadBomber2 on 8:11 pm on April 5, 2002 btw u want me to start a new post and what about my bomb. -- Posted by ThEsHaDy1 on 9:16 pm on April 5, 2002 ladieluver ,      I seen you said there was a Metal Door, How did you get in thro the door? And juss to let some peeps know in the furture cut the fone line.. that helps alarms not kinda-call the police... then you just got to worrie bout and loud ass bell.. but anywayz.. im out -- Posted by MadBomber2 on 1:00 pm on April 6, 2002 well when u cut the phone line everyone knows cus they cant call anyone so they get help and they come fix the wire. They then see it was dileberately cut and may even see u before he finds the damage in the wire and besides most dont have alarms.  This can happen in like 7 minutes if its a good company.     http://www.bombshock.com