Home > Burning Stuff > The Ultimate Flame Thrower


The Ultimate Flame Thrower


The Ultimate Flame Thrower.

By: Chimera

For: C-Shift Phoenix bbs!
319-345-2682
24-7 days a
Week!
300_1200_2400_9600_19200 Baud!

Ok Dudes,
This is my first attempt
at an anarchy file, so please bear with me.
This AWESOME weapon was developed on an extremely
boring night at work by
two inspired and very creative individuals. This text file is
dedicated to
their memories.

List of Materials needed:

A. 1-2.5
gallon water pressure fire extinguisher.
B. 2 gallons of Isopropyl Alochol
C. 1 Air
compressor or access to an air compressor (local gas station)
D. 1 Propane torch or lighter.
(hand held type)
E. 2 Hose clamps

Ok, have you got it figured out yet? no? ok,
read up!

First off is get all your materials together. Everything is pretty easy to

get ahold of. Try your local drug and hardware stores for the alcohol and
hose clamps.
And try your local fire extinguisher sales and service store
to find a used fire
extinguisher. Make sure it is the right kind!

Now, lets get to work.
Let all
the pressure out of the fire extinguisher before you start.
Open up the top of the tank and
turn it upside down to empty the
remaining water out of it. Let it dry out.
Now, take
the hose of fire extinguisher and use the hose clamps to
mount the propane torch to the end
of it. Let the propane torch hang
out about 2 inches past the end of the nozzle. You don’t
want this right
on the end of the hose or it may cause the flame to travel up the hose. /> This may cause you a serious problem, BOOM!. You now have the igniter
attached to your
flame thrower.

Now that you have the torch securely attached to the hose, test it out
and
see if it works ok. The flame should cross the path of the nozzle about
2 inches
from the end.

Ok. dude, the hard part is over. Now take your 2 gallons of alcohol and

fill the tank. Don’t fill the tank more than half full or you will not
get enough
compressed air into the tank. Re-install the the hose to the
tanks and make sure it fits
tight. Leaks can be dangerous!

You’re almost there, dude. Take the tank and fill it
with compressed air
from your air compressor or the air compressor at you local gas station.

About 40-50 pounds of air should do, check the maximum pressure rating for
your
extinguisher before you start filling it.

Now, find a fairly isolated area to use this
thing, because it will
DEFINITELY attract attention. Oh, and adult supervision is advised.

Hold the igniter away from you or anybody else that wishes to see their
next birthday
and light the propane torch. All you have to do now is aim
the nozzle where you want it to go
and squeeze the trigger on the fire
extinguisher. A 40-50 foot long, 6-8 foot wide flame will
shoot from your
newest toy!

This baby works great! I know, I have seen it in
use. It puts out one hell
of a flame ball and generates some intense heat. It will definitely
burn
trees, cars, houses, schools, nosey neighbours, barking dogs, ect…..

I
would suggest you shut the igniter flame off first, then let off on the
trigger of the fire
extinguisher. This will keep the flame from trying to
travel up the end of the hose and into
the tank. Remember: SAFETY FIRST!

NOTE: I’m not too sure about the legality of this
toy, so I wouldn’t
recommend you show it to your local police force.
Have fun!

Later daze,
Chimera

C-Shift Phoenix BBS 319-345-2261
July 1988

Please have a look through some of our related articles:




  1. No comments yet.
  1. No trackbacks yet.