Home
You Are Here: Home » Old Forums Archive » Explosives » Need help testing server

Need help testing server


— Posted by paladinpress on 5:08 pm on April 7, 2002

I got  the information I needed the testing is over.     Here is some filler
——————————————————-
       Acetone Peroxide

    To a 500-mL beaker add 50 mL of acetone, then stir in 30 mL of 30% hydrogen peroxide. Place the beaker in a salt-ice bath and cool it to 5 C. After cooling, slowly add 3 mL of 75% sulfuric acid drop by drop with an eye dropper. Stir the mixture continuously while adding the acid, keep the temperature between 5 C to 10 C, stop adding acid if the temperature gets to high. It is very important that you moderate the reaction, high temperatures will lower your yield and cause the formation of the less useful dicyclo isomer. After adding all the acid, continue stirring for 5 minutes. Keep the mixture in the bath for 1 to 3 hours, or even up to 24 hours. After sitting, a white precipitate should have formed. Filter the mixture to collect the crystals, then wash them with 300-500 mL of water. Allow the crystals to dry before using, keep them damp if storing. For increased purity, add the precipitate to ethyl ether and let it dissolve. Place the ethyl ether solution in a separatory funnel and wash by shaking with three portions of cold water. Add the ethyl ether solution to a beaker and heat it on a steam bath to evaporate the ethyl ether. It should take about 3 hours to dry.

(Edited by paladinpress at 3:22 am on April 8, 2002)


— Posted by 4N4rKi3 b0mZz3 r k3w on 11:05 pm on April 7, 2002

Quite the novel idea…

Good work, old chum.


— Posted by Sicopath on 1:21 am on April 8, 2002

dude, wrong forum.


Leave a Comment

Scroll to top