You Are Here: Home » Old Forums Archive » Explosives » Spraypaint


— Posted by MrDingelFritz on 6:17 pm on Feb. 12, 2002

can sprapaint be sprad on a driveway all along it. Then put a mach to it and it burn on the trail you made??

— Posted by jmb1125 on 9:13 pm on Feb. 12, 2002

No, I don’t think that would work.

— Posted by MrDingelFritz on 10:04 pm on Feb. 12, 2002

k thanks

— Posted by largeidaccam on 10:10 pm on Feb. 12, 2002

look on the can ! if it says flamable then yes and its only flammable if its wet if at all

— Posted by Hergor on 7:17 am on Feb. 13, 2002

the stuff in spraypaint cans that burns is mostly the propulsion gas and the vapors of the paint.
when you spray the paint on an object the vapors will vanish very fast. on roads even faster because they canalize the wind or are on open field.

so it probably won’t work…sorry

— Posted by hippie john on 4:52 pm on Mar. 17, 2002

i would use acetone instead of spray paint.

— Posted by Just0nePepsi on 4:56 pm on Mar. 17, 2002

Gasoline……..thats the easiest thing to use.

— Posted by Gerdyman123 on 11:29 pm on Mar. 17, 2002

No no if your lookin for sumthin fun   use nitro   its used in those gas powerd R.C. cars… well it burns a clearish blue flame  its bad ass

you can buy the shit at any old modle shop

— Posted by None on 6:55 am on Mar. 18, 2002

by nitro do you mean nitromethane? id use that in ANNM.
as someone else mentioned, the only flammable parts in the can would be the propulsion gasses, and the solvent in it, it would be a better flame to just use the solvent alone. no advantages in paint, except the mark.

— Posted by GhEtTo BoY on 4:52 am on Mar. 19, 2002

use something like mineral tupentine or methalated spirits
spraypaint or any other spray for that matter lasts as long as it dries it losses at least 40% of its flamability after that anyway spray paint dont work to well wen u hold it vertical doz it ?

— Posted by Blackwolf on 6:30 pm on Mar. 19, 2002

OK this is my first post & im no explosive genious, hell im just learning the basic things. I do however have a fairly good idea if your looking for a cheap fuse… Mix Gasoline with Styrafoam until you get a nice sticky substance. Im not positive, but I think its a kind of napalm. Whatever it may be it stays good for a long time. Once it dries you can just poke a little hole into it & it will light again. Once again im new so please dont bust my balls on this post, because im just trying to add my thoughts.


— Posted by Chaffin on 11:24 pm on April 3, 2002

MrDingel, if you want something like that just use some bottled alchol (not spelled right) and poor a thin line of it where ever….BTW, i raace those r/c cars and your right. they kick some major ass!!! i do off-road

— Posted by Chaffin on 11:26 pm on April 3, 2002

or you might be able to roll out some toilet paper and then soak it down with whatever. but unroll it first, just incase you might be an idiot.

— Posted by zx9 on 2:15 pm on April 4, 2002

USE WD-40 !!
you can get it at some gastations and at all hardware stores.
i forgot what it is actually used for, but i no people won’t question you about buying it like they would do if you are buying salt peter

— Posted by paladinpress on 4:46 pm on April 5, 2002

You can use either spary paint or wd-40 but I had a bad expereince with it back in 1999 me and wayne we haing napalm wars were we would load up sticks with napalm and fling tham at each other and most landed on the asphalt and later the asphalt just blew away in the area’s it landed the heat had unbounded the top layer and we got yelled at and had to tar and reblack top it and that shit ain’t cheap

— Posted by guzzetti on 6:53 pm on April 5, 2002

jUST As JUSTONEPEPSI said(hes the man) Use gasoline…..and i say mix Kerosene into it!

— Posted by Chaffin on 12:21 am on April 7, 2002

hell, i’ll tell you wht to use…fingernail polish remover, i was outside tonight and screwin around with it, my gawd. once it gets goin it’s not goin out till it’s all used to. and if you ever want to soak a home made fuse that would be the thing to use. one other thing i found out while messing around. just for fun…take a 20oz empty bottle and fill it just enough for it to almost fill the bottom up, ceal lid and shake. let it sit for about 1 min. then take of the cap and stand it up on the ground. preferibly pavement. next, get something that is about a foot or 2 long that will light and stay lit. then light the tip of it and hold it down in the bottle for about half a second and OMG scred the shit outta me. look like some type of flame thrower or something but i think it’s cool. good for starting fires…just a thought

Always Coca~Cola

— Posted by paladinpress on 5:05 am on April 7, 2002

That shit is good for a Napalm instead of gas cause it is more flamable, and is more caustic and can handle more PPM of styrofoam (Plus just love the infrequent sniff myself)

Leave a Comment

Scroll to top