Home
You Are Here: Home » Old Forums Archive » Weapons » cud some 1 help me 2 make a patato gun

cud some 1 help me 2 make a patato gun


— Posted by sk8ordie on 9:11 am on April 5, 2002

how the hell do i make a patato gun i just cant figure out how 2 make 1 cud sum1 tell me how


— Posted by Radiant on 9:14 am on April 5, 2002

www.spudtech.com


— Posted by paladinpress on 9:48 am on April 5, 2002

I have the PDF “SpudZooka_Plans_2001”
It is a Penumatic spudgun{Air Charged}
I can E-mail it to you if you wish
it is 628kb


— Posted by Radiant on 11:20 am on April 5, 2002

paladin: that uses a piston right?
maybe its a bit complicated for a first time spudgun builder?


— Posted by JC12gage on 12:12 pm on April 5, 2002

it is very simple to make a hairspray or combustion one.  #1Get a 4″abs thick wall piping about 1.5′ or more long no longer than 2′. #2 determine what calber of barrel you want,  I would recomend a 1.5″ thick wall abs probably 5’long. #3 get an adapter to fit the 1.5″pipe on the 4″ pipe.  #4 get a screw on plug for the back of the 4″pipe.  Use abs glue for everything and let dry for 24 hours.  You can make your own ignitor buy drilling 2 small holes in the chamber like this   / and put metal screws in the holes so the are this |–| far apart at the tips. next you hook a bbQ sparker to the screws and this makes a spark to set of your fule.  you might want to make a small hole to put your fule in but make shure you have some way of closeing it like a valve or somthing. or it should anyway if you did it right.  make shure you use the thick abs and not the thin drain stuf.  ABS isstronger than pvc for a combustion because it does not shater.  It should look like this:
  __/______
 |                  ——————————
 |_________/——————————


— Posted by balor on 1:30 pm on April 5, 2002

Those addresses will be sufficient for him.Also a search engine will turn up enormous amounts of sites relating to the making of spudguns.


Leave a Comment

Scroll to top