Home
You Are Here: Home » Old Forums Archive » Weapons » How can I make brass knuckles?

How can I make brass knuckles?


— Posted by wizeass on 12:07 am on Dec. 23, 2001

Im gonna be in a kinda big fight next friday and I want brass knuckles does anybody know how I can make some?


— Posted by somefukinsnapov on 3:26 am on Dec. 23, 2001

just bend a sic peice of metal round your knuckles smak cunts with that  or just a filthy thik bolt will be as good as any knuckle buster


— Posted by Ankou on 4:44 am on Dec. 23, 2001

Get one of those huge combat knifes that has brass knuckles built in. You can punch and slash with it.


— Posted by Sicopath on 5:30 pm on Dec. 23, 2001

Wear 2 gloves on the same hand, and place a piece of sheet metal between the two. The piece of metal should be cropped to go over your knuckles, the outer glove stops the metal from falling out, the inner one protects your hand from abrasions.


— Posted by Aceman1126 on 7:05 pm on Jan. 1, 2002

take a piece  of acryilic (spelled wrong) plastic, and cut out knukles from that. They work good, just don’t hit anything really hard, like a brick wall, or they will break. the good thing about the plastic is that you can sharpen them to make spiked knuckles! Also metal detectors won’t pick them up. A good place to get a good sized piece of plastic is a hospital’s bio-med shop. Cutting it by hand is a bitch so make sure you have a band saw or a jig saw. A dremel tool works great too.


— Posted by UnHoLySeDiTiOn on 12:28 pm on Jan. 11, 2002

Try wearing rings on ur fingers.  Class rings are a bitch and they hurt like fuck, (knowing from experiance, the fuck cut below my eye)  Rings are less conspicuous then knucks, more legal, and people wont call you a bitch for wearing them during a fight.  


— Posted by Barker on 12:37 pm on Jan. 11, 2002

Rings Fucking hurt!!! They never fail me.Try and get it a sleeper ring cuz its stylish and it hurts


— Posted by jmb1125 on 7:04 pm on Jan. 17, 2002

Real original brass knuckles look like four rings soldered
together. Then there is a “T” piece with the base of the
“T” soldered to the four rings. The top of the”T” would
be the part that sits in your palm.


— Posted by lifeanddeathmc on 10:42 am on Jan. 24, 2002

How about steel nuckles instead?, easy enough to make , three pieces of 25x25x1.6mm steel tube by about 21mm wide , lay the three pieces along side eachother and then move the piece in the centre
/
/\//
/ /
——- upward similar to diagram ,spot weld the pieces together then weld a piece of round bar across the bottom points of the lower pieces.


— Posted by preditor on 4:29 pm on Feb. 10, 2002

you can just wrap chain around your knuckles it’s always worked for me


— Posted by qube on 5:59 pm on Feb. 10, 2002

Chain seems best. Could always put sum horseshoes in a boxing glove, im sure it worked in the cartoons…


— Posted by jmb1125 on 11:40 pm on Feb. 10, 2002

Horseshoe? Boxing glove?
What if the guy holds up one of those little cocktail
umbrellas to deflect your blow?

(like in a cartoon)


— Posted by BoOnDoCk SaInT on 7:37 pm on Feb. 12, 2002

Buddy if you gotta fight on the spot get ur watch undo it a bit but cloth between in and ur fist then crack them good especially if its a metal watch, or if u just want bear knuckles get a roll of quarters but it in ur hand and u have iron punches with no give at all!!!!


— Posted by jmb1125 on 9:32 pm on Feb. 12, 2002

lifeanddeathmc and boondock both have good ideas.


— Posted by BoOnDoCk SaInT on 9:59 pm on Feb. 12, 2002

Thanks man sorry about the spellin errors, i was in a rush im no brain dead dummy!


— Posted by Cypher on 11:46 pm on Feb. 12, 2002

If your gonna bother running around with boxing gloves with horseshoez in it or 2 gloves and sheet metal why not carry around a fucken lead pipe or a fucken knife!!?

Rings are a good idea..i cant say i really know from experience but you see some of the rings that go round like 2 fingues or someshit like that they would b pretty good

At least some of these idea are inconspicous (Sp?)
i still go with what i said about the acrylic plastic knuckles..id see them as the best cause u can conceal em and pass metal detectors…or rings but those 2 would b my  best bets


— Posted by jmb1125 on 1:06 am on Feb. 13, 2002

Cypher, partner,

They are just called “BRASS KNUCKLES” they do not
have to be brass. Alum, plastic, whatever will work.
I WISH THERE WAS A WAS TO DRAW STUFF ON HERE.

Then I could post my hilarious cartoons I drew in
high school like the:
“KILLING AND MAIMING APRIL SPECIAL”
featuring: bombing, burning, beating, shooting,
stabbing, blood, guts, death, violence, killing,
murder, maiming, arson, looting, pillage, rape,
theft, destruction, and Jr. Varsity Bake Sale.


— Posted by preditor on 2:05 pm on Feb. 13, 2002

What I like about useing chain is thet you can not only use it on you knuckles but can also us it to whip or strangel someone


— Posted by Cerebral Rapist on 6:11 pm on Mar. 15, 2002

I’d say go with the rings, I wear a class ring on one hand and a Superman ring on the other, and thats all I need to knock someone out.


— Posted by rishka on 6:44 am on Mar. 16, 2002

nar , i’ve been thinking about this ring idea , and i’ve seen around , those rings that have skulls on them that stick out. has anyone else seen that kind?
now i dunno about the rest of you , but it would be pretty fucking funny , if you had one of htose rings on your middle finger when you punched someone in the head .  it’d look pretty funky-the scar thats left , havin a skull imprinted on your face.


— Posted by Hergor on 11:12 am on Mar. 16, 2002

hmm, i think it would be even funnier if you had “i’m a dork” written in inverted letters on your ring.

that would be good when the ‘punch-mark’ was either on your opponents forehead or cheek… :biggrin:


— Posted by rishka on 9:16 pm on Mar. 16, 2002

rofl , or even better ‘dont fuck with shockers’ written on it and have your own personal signature on it .
hey , stop givin me ideas!! this can be done you know .


— Posted by acidtoe33 on 8:33 pm on Mar. 18, 2002

all you goota do to make kick ass knuckles is get some of that good clay, mold it all around you knuckles then take the clay nd pour liquid metal over it and wat for it to dry and they should be a perfect fit.


— Posted by johnny 99 on 8:47 pm on Mar. 18, 2002

Actually, years ago there was a comic book hero that had a ring like that.(skul) coated with thermite or some such, that he could ignite and then brand the bad guy with it in the forehead!! pretty cool, but how would you heat it up quickly without burning the shit out of your self?


— Posted by rishka on 4:48 am on Mar. 19, 2002

good point , maybe you could have some sort of heat protective material on the inside of the ring so you didnt get burnt.
and make it fire proof as well , cause you could heat it with a lighter , and have the heat protective material all around the inside of the ring.
then u could put it on,and use it i spose , dont know about the fire protective thing tho


— Posted by None on 5:12 am on Mar. 19, 2002

chains hurt ur knuckles when you punch hard things, even soft things, a lot more tahn bare knuckles.
half the reason for wearing brass knuckles is to protect your knuckles…
a roll of quarters or any bar makes your second knuckle stick out, which is much more fragile than the first.
i would cast them in a block of clay, out of lead or solder, due to their low melting temp and heaviness. maybe even put a row of BBs on top.
otherwise id just make a tight fist.


— Posted by balor on 3:18 pm on Mar. 19, 2002

Well this thread was started last December and the fight was on the next Friday so I wonder did the poster get his ass kicked or did he make some knuckles.


— Posted by Strobe on 6:25 pm on Mar. 19, 2002

well… what what i normally do is wear my big ass wallet chain and then when i need it i just take it off and wrap in round my fist…..


— Posted by rishka on 9:25 pm on Mar. 19, 2002

now that you mention it balor , i looked back on dates and it was a while ago . the question is , did he win or did he lose?
this is still a good thread , cause its giving a  whole new set of ideas. dont delete it just yet! or put it in archives , whatever.
as im thinking about it , the chain thing would hurt a lot ,considering that its on both sides of your hand and the amount of force that you hit someones face with. not a pretty picture .
R


— Posted by balor on 3:20 pm on Mar. 20, 2002

I agree with you Rishka, it is a good thread and I have no intention of deleting it.But the question is still unanswered-Did he win or lose??????
Come on Wiseass we are still waiting!! LOL


— Posted by rishka on 5:16 am on Mar. 21, 2002

maybe he got the shit beaten out of him and thats why hes no answering


— Posted by balor on 5:00 pm on Mar. 21, 2002

Rishka, Wizeass made his last reply on Jan 26th.Maybe he died from his injuries after a month on lifesupport.
Poor old Wizeass, Rest in peace!


— Posted by wizeass on 6:26 pm on Mar. 21, 2002

Have no fears good ol wizeass is here. And about the fight it was a jolly ol time, my friends showed up and tihs guy had two friends i fucked him up then me and my friends punked out his two other friends. I used the chain idea but instead i put a heavy inside my hand and made a fist. Lets just say i think it hurt him. And please dont close this thread i think its still good for learning


— Posted by balor on 2:28 pm on Mar. 22, 2002

Fair play Wizeass! And myself and Rishka worrying ourselves to death just because we hadnt heard from you!LOL!


— Posted by Roland49686 on 3:58 pm on Mar. 22, 2002

Heres the MOST convieniant way to have a brass knuckle:
Take a Carabiener (for climbing) and put your hand thru the middle. It should fit Perfectly and works even better. I shattered this one guys teeth with it.
Peace


— Posted by UnStAbLe on 8:02 pm on Mar. 22, 2002

unholysedition…. Haha so thats how you got that wicked cut… damn class ring aye… well that sucks a big one bro.


— Posted by IcedMetal on 1:46 am on April 6, 2002

Hey does it work to wear really destructive rings and light gloves, would it be more powerful than just bare knuckles?  The gloves are to conceal the rings, of course……


— Posted by rishka on 8:10 am on April 6, 2002

it’d depend on how thick or noticable the rings were and also how thick the glove was.
i spose it’d give you some protection but you cant exactly stop a fight and say ‘sorry , gotta put my sunday best gloves on’ cause you dont wanna have blood on your hands.


— Posted by spootyguy on 9:30 am on April 6, 2002

Get hold of some stuff called ‘Plumbers Putty’, its marketed in the UK by Araldite, i think, but theres probably other manufacturers elsewhere.
You get a rod of putty like stuff with a hardener strip running through the centre of the stuff, and when you mix the two together and expose them to air, they dry and harden ‘like steel’. Its pretty solid stuff, you can file it down to points if required, and it doesnt shatter easily.
Mix some up, and mould a four-fingered ring thing onto your hand with a couple of nice rounded bits sticking out (or sharpened, if your a dirty evil scumbag). You could stick some rocks (or razor blades) into it before it sets if you dont have enough to make pointy bits.
Should royally fuck up someones face…


— Posted by spootyguy on 10:25 am on April 6, 2002

Wow, posting on another thread gave me a thought…
Get hold of a tungsten-carbide tile-cutting saw, you know, the one with the weird black grit stuck on the cutting surface. Hit the grit with a hammer (its kinda brittle, and its no good trying to cut it off) and pick up the bits that fall off. Glue them with some strong epoxy to the knuckles of any set of brass knuckles.
This stuff rips skin easily…
Now, when you punch some guy in the face, parts of his face will be left on the knuckles.. 🙂 sweet..!
Or you could set a bunch of grit in the points of some knuckles made with plumber’s putty… that way it’d stick in there and you wouldnt have to worry about glue…
Thats all theoretical, of course 🙂


— Posted by Pro on 9:07 pm on April 6, 2002

Cant yall just cast a pair. take your fist and push it down into some really fine sand and then pour molten steel into it but put a bar or some thing sticking out of the back for a handle later. well after it hardens pull it out by the bar and make another impression into the sand with your fist this time wiggle it around a bit to make it bigger. pour steel into it about half of the mold and coat the imprint that you made earlier with lube take the immpression with the with the bar and putit down into the center of the second mold. let it cool and make one for the other hand put it between two pairs of gloves. makes a nice imprint on the guys head.


— Posted by paladinpress on 12:26 pm on April 7, 2002

Its is posionous and mabable but what about just lead for use of aquacition and ease of making..   just a thought


— Posted by Pro on 7:46 am on April 8, 2002

yes lead would work and it would give a little extra weight in the punch but i have some bad experiences with lead. you have to get the perfict thickness or it will break itself or brake your hand if your not care full. but i have found that striking with the open hand yaknow right on the bone in yer palm. it just shatters what ever is in its path if used correctly.


Leave a Comment

Scroll to top